Create ip2.sh (#125)

* Create ip2.sh

* remove bloat

nextcloud-startup-script.sh

@@ -456,39 +456,9 @@ then
     if [ "$IFACE" = "" ]
     then
         echo "IFACE is an emtpy value. Trying to set IFACE with another method..."
-        IFCONFIG="/sbin/ifconfig"
-        INTERFACES="/etc/network/interfaces"
-        IFACE=$(ip -o link show | awk '{print $2,$9}' | grep 'UP' | cut -d ':' -f 1)
-        ADDRESS=$(hostname -I | cut -d ' ' -f 1)
-        NETMASK=$($IFCONFIG | grep -w inet |grep -v 127.0.0.1| awk '{print $4}' | cut -d ":" -f 2)
-        GATEWAY=$(route -n|grep "UG"|grep -v "UGH"|cut -f 10 -d " ")
-
-        cat <<-IPCONFIG > "$INTERFACES"
-        source /etc/network/interfaces.d/*
-
-        # The loopback network interface
-        auto lo $IFACE
-        iface lo inet loopback
-
-        # The primary network interface
-        iface $IFACE inet static
-        pre-up /sbin/ethtool -K $IFACE tso off
-        pre-up /sbin/ethtool -K $IFACE gso off
-        # Fixes https://github.com/nextcloud/vm/issues/92:
-        pre-up ip link set dev $IFACE mtu 1430
-
-        # Best practice is to change the static address
-        # to something outside your DHCP range.
-        address $ADDRESS
-        netmask $NETMASK
-        gateway $GATEWAY
-
-        # This is an autoconfigured IPv6 interface
-        # iface $IFACE inet6 auto
-
-        # Exit and save:            [CTRL+X] + [Y] + [ENTER]
-        # Exit without saving:      [CTRL+X]
-IPCONFIG
+        wget -q $STATIC/ip2.sh -P $SCRIPTS
+        bash $SCRIPTS/ip2.sh
+        rm $SCRIPTS/ip2.sh
     fi
     ifdown $IFACE
     sleep 1

static/ip2.sh

@@ -0,0 +1,41 @@
+#!/bin/sh
+
+# This file is only used if IFACE fail in the startup-script
+
+IFCONFIG="/sbin/ifconfig"
+INTERFACES="/etc/network/interfaces"
+
+IFACE=$(ip -o link show | awk '{print $2,$9}' | grep 'UP' | cut -d ':' -f 1)
+ADDRESS=$(hostname -I | cut -d ' ' -f 1)
+NETMASK=$($IFCONFIG | grep -w inet |grep -v 127.0.0.1| awk '{print $4}' | cut -d ":" -f 2)
+GATEWAY=$(route -n|grep "UG"|grep -v "UGH"|cut -f 10 -d " ")
+
+cat <<-IPCONFIG > "$INTERFACES"
+source /etc/network/interfaces.d/*
+
+# The loopback network interface
+auto lo $IFACE
+iface lo inet loopback
+
+# The primary network interface
+iface $IFACE inet static
+pre-up /sbin/ethtool -K $IFACE tso off
+pre-up /sbin/ethtool -K $IFACE gso off
+# Fixes https://github.com/nextcloud/vm/issues/92:
+pre-up ip link set dev $IFACE mtu 1430
+
+# Best practice is to change the static address
+# to something outside your DHCP range.
+address $ADDRESS
+netmask $NETMASK
+gateway $GATEWAY
+
+# This is an autoconfigured IPv6 interface
+# iface $IFACE inet6 auto
+
+# Exit and save:	[CTRL+X] + [Y] + [ENTER]
+# Exit without saving:	[CTRL+X]
+
+IPCONFIG
+
+exit 0