mirror of
https://github.com/pfsense/pfsense.git
synced 2025-10-26 11:38:35 +00:00
2036 lines
58 KiB
PHP
2036 lines
58 KiB
PHP
<?php
|
|
/* $Id$ */
|
|
/*
|
|
interfaces.inc
|
|
Copyright (C) 2004-2006 Scott Ullrich
|
|
Copyright (C) 2008 Ermal Luçi
|
|
All rights reserved.
|
|
|
|
function interfaces_wireless_configure is
|
|
Copyright (C) 2005 Espen Johansen
|
|
All rights reserved.
|
|
|
|
originally part of m0n0wall (http://m0n0.ch/wall)
|
|
Copyright (C) 2003-2004 Manuel Kasper <mk@neon1.net>.
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notices,
|
|
this list of conditions and the following disclaimer.
|
|
|
|
2. Redistributions in binary form must reproduce the above copyright
|
|
notices, this list of conditions and the following disclaimer in the
|
|
documentation and/or other materials provided with the distribution.
|
|
|
|
THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
|
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
|
|
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
|
|
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/* include all configuration functions */
|
|
require_once("functions.inc");
|
|
require_once("globals.inc");
|
|
|
|
function interfaces_loopback_configure() {
|
|
mwexec("/sbin/ifconfig lo0 127.0.0.1");
|
|
mwexec("/sbin/ifconfig lo0 up");
|
|
return 0;
|
|
}
|
|
|
|
function interfaces_vlan_configure() {
|
|
global $config;
|
|
|
|
$i = 0;
|
|
if (is_array($config['vlans']['vlan']) && count($config['vlans']['vlan'])) {
|
|
foreach ($config['vlans']['vlan'] as $vlan) {
|
|
if(empty($vlan['vlanif'])) {
|
|
$vlan['vlanif'] = "vlan{$i}";
|
|
}
|
|
/* XXX: Maybe we should report any errors?! */
|
|
interface_vlan_configure($vlan['if'], $vlan['tag'], $vlan['vlanif']);
|
|
$i++;
|
|
}
|
|
}
|
|
}
|
|
|
|
function interface_vlan_configure($if, $tag, $vlanif = "") {
|
|
global $config, $g;
|
|
|
|
/* devices with native VLAN support */
|
|
$vlan_native_supp = $g['vlan_native_supp'];
|
|
|
|
/* devices with long frame support */
|
|
$vlan_long_frame = $g['vlan_long_frame'];
|
|
|
|
/* make sure the parent interface is up */
|
|
mwexec("/sbin/ifconfig " . escapeshellarg($if) . " up");
|
|
|
|
if ($g['booting'] || !(empty($vlanif))) {
|
|
mwexec("/sbin/ifconfig {$vlanif} destroy");
|
|
mwexec("/sbin/ifconfig {$vlanif} create");
|
|
} else
|
|
$vlanif = exec("/sbin/ifconfig vlan create");
|
|
|
|
mwexec("/sbin/ifconfig {$vlanif} vlan " .
|
|
escapeshellarg($tag) . " vlandev " .
|
|
escapeshellarg($if));
|
|
|
|
/* get driver name */
|
|
for ($j = 0; $j < strlen($if); $j++) {
|
|
if ($if[$j] >= '0' && $if[$j] <= '9')
|
|
break;
|
|
}
|
|
$drvname = substr($if, 0, $j);
|
|
|
|
if (in_array($drvname, $vlan_native_supp))
|
|
mwexec("/sbin/ifconfig {$if} vlanhwtag");
|
|
else if (in_array($drvname, $vlan_long_frame))
|
|
mwexec("/sbin/ifconfig {$if} vlanmtu");
|
|
|
|
mwexec("/sbin/ifconfig {$vlanif} up");
|
|
|
|
/* invalidate interface cache */
|
|
get_interface_arr(true);
|
|
|
|
/* all vlans need to spoof their parent mac address, too. see
|
|
* ticket #1514: http://cvstrac.pfsense.com/tktview?tn=1514,33
|
|
*/
|
|
foreach($config['interfaces'] as $interfaces) {
|
|
if($interfaces['if'] == $if && $interfaces['spoofmac']) {
|
|
mwexec("/sbin/ifconfig " . escapeshellarg($if) .
|
|
" link " . escapeshellarg($interfaces['spoofmac']));
|
|
}
|
|
}
|
|
|
|
/* XXX: ermal -- for now leave it here at the moment it does not hurt. */
|
|
mwexec("/sbin/ifconfig " . escapeshellarg($if) . " up");
|
|
|
|
return $vlanif;
|
|
}
|
|
|
|
function interfaces_bridge_configure() {
|
|
global $config;
|
|
|
|
$i = 0;
|
|
if (is_array($config['bridges']['bridged']) && count($config['bridges']['bridged'])) {
|
|
foreach ($config['bridges']['bridged'] as $bridge) {
|
|
if(empty($bridge['bridgeif'])) {
|
|
$bridge['bridgeif'] = "bridge{$i}";
|
|
}
|
|
/* XXX: Maybe we should report any errors?! */
|
|
interface_bridge_configure($bridge);
|
|
$i++;
|
|
}
|
|
}
|
|
}
|
|
|
|
function interface_bridge_configure(&$bridge) {
|
|
global $config, $g;
|
|
|
|
if (!is_array($bridge))
|
|
return -1;
|
|
|
|
$members = explode(',', $bridge['members']);
|
|
if (!count($members))
|
|
return -1;
|
|
|
|
$checklist = get_configured_interface_list();
|
|
|
|
$cmd = "";
|
|
foreach ($members as $member) {
|
|
if (!array_key_exists($member, $checklist))
|
|
continue;
|
|
$realif = get_real_wan_interface($member);
|
|
$realif = escapeshellarg($realif);
|
|
/* make sure the parent interface is up */
|
|
mwexec("/sbin/ifconfig {$realif} up");
|
|
$cmd .= " addm {$realif}";
|
|
}
|
|
|
|
|
|
if ($g['booting'] || $bridge['bridgeif'] <> "") {
|
|
mwexec("/sbin/ifconfig {$bridge['bridgeif']} destroy");
|
|
mwexec("/sbin/ifconfig {$bridge['bridgeif']} create");
|
|
$bridgeif = $bridge['bridgeif'];
|
|
} else
|
|
$bridgeif = exec("/sbin/ifconfig bridge create");
|
|
|
|
/* Add interfaces to bridge */
|
|
mwexec("/sbin/ifconfig {$bridgeif} {$cmd}");
|
|
|
|
if (isset($bridge['enablestp'])) {
|
|
/* Choose spanning tree proto */
|
|
mwexec("/sbin/ifconfig {$bridgeif} proto {$bridge['proto']}");
|
|
|
|
$stpifs = explode(',', $bridge['stp']);
|
|
foreach ($stpifs as $stpif) {
|
|
$realif = get_real_wan_interface($stpif);
|
|
mwexec("/sbin/ifconfig {$bridgeif} stp {$realif}");
|
|
}
|
|
if ($bridge['maxage'] <> "")
|
|
mwexec("/sbin/ifconfig {$bridgeif} maxage {$bridge['maxage']}");
|
|
if ($brige['fwdelay'] <> "")
|
|
mwexec("/sbin/ifconfig {$bridgeif} fwddelay {$bridge['fwdelay']}");
|
|
if ($brige['hellotime'] <> "")
|
|
mwexec("/sbin/ifconfig {$bridgeif} hellotime {$bridge['hellotime']}");
|
|
if ($brige['priority'] <> "")
|
|
mwexec("/sbin/ifconfig {$bridgeif} priority {$bridge['priority']}");
|
|
if ($brige['holdcount'] <> "")
|
|
mwexec("/sbin/ifconfig {$bridgeif} holdcnt {$bridge['holdcnt']}");
|
|
$pconfig = explode(",", $bridge['ifpriority']);
|
|
$ifpriority = array();
|
|
foreach ($pconfig as $cfg) {
|
|
$embcfg = explode(":", $cfg);
|
|
foreach ($embcfg as $key => $value)
|
|
$ifpriority[$key] = $value;
|
|
}
|
|
foreach ($ifpriority as $key => $value) {
|
|
$realif = get_real_wan_interface($key);
|
|
mwexec("/sbin/ifconfig ${bridgeif} ifpriority {$realif} {$value}");
|
|
}
|
|
$pconfig = explode(",", $bridges['ifpathcost']);
|
|
$ifpathcost = array();
|
|
foreach ($pconfig as $cfg) {
|
|
$embcfg = explode(":", $cfg);
|
|
foreach ($embcfg as $key => $value)
|
|
$ifpathcost[$key] = $value;
|
|
}
|
|
foreach ($ifpriority as $key => $value) {
|
|
$realif = get_real_wan_interface($key);
|
|
mwexec("/sbin/ifconfig ${bridgeif} ifpathcost {$realif} {$value}");
|
|
}
|
|
|
|
}
|
|
|
|
if ($bridge['maxaddr'] <> "")
|
|
mwexec("/sbin/ifconfig {$bridgeif} maxaddr {$bridge['maxaddr']}");
|
|
if ($bridge['timeout'] <> "")
|
|
mwexec("/sbin/ifconfig {$bridgeif} timeout {$bridge['timeout']}");
|
|
if ($bridge['span'] <> "") {
|
|
$realif = get_real_wan_interface($bridge['span']);
|
|
mwexec("/sbin/ifconfig {$bridgeif} span {$realif}");
|
|
}
|
|
$edgeifs = explode(',', $bridge['edge']);
|
|
foreach ($edgeifs as $edgeif) {
|
|
$realif = get_real_wan_interface($edgeif);
|
|
mwexec("/sbin/ifconfig {$bridgeif} edge {$realif}");
|
|
}
|
|
$edgeifs = explode(',', $bridge['autoedge']);
|
|
foreach ($edgeifs as $edgeif) {
|
|
$realif = get_real_wan_interface($edgeif);
|
|
mwexec("/sbin/ifconfig {$bridgeif} -autoedge {$realif}");
|
|
}
|
|
$ptpifs = explode(',', $bridge['ptp']);
|
|
foreach ($ptpifs as $ptpif) {
|
|
$realif = get_real_wan_interface($ptpif);
|
|
mwexec("/sbin/ifconfig {$bridgeif} ptp {$realif}");
|
|
}
|
|
$ptpifs = explode(',', $bridge['autoptp']);
|
|
foreach ($ptpifs as $ptpif) {
|
|
$realif = get_real_wan_interface($ptpif);
|
|
mwexec("/sbin/ifconfig {$bridgeif} -autoptp {$realif}");
|
|
}
|
|
$stickyifs = explode(',', $bridge['static']);
|
|
foreach ($stickyifs as $stickyif) {
|
|
$realif = get_real_wan_interface($stickyif);
|
|
mwexec("/sbin/ifconfig {$bridgeif} sticky {$realif}");
|
|
}
|
|
$privateifs = explode(',', $bridge['private']);
|
|
foreach ($privateifs as $privateif) {
|
|
$realif = get_real_wan_interface($privateif);
|
|
mwexec("/sbin/ifconfig {$bridgeif} private {$realif}");
|
|
}
|
|
|
|
mwexec("/sbin/ifconfig {$bridgeif} up");
|
|
|
|
return $bridgeif;
|
|
}
|
|
|
|
function interfaces_lagg_configure() {
|
|
global $config;
|
|
|
|
$i = 0;
|
|
if (is_array($config['laggs']['lagg']) && count($config['laggs']['lagg'])) {
|
|
foreach ($config['laggs']['lagg'] as $lagg) {
|
|
if(empty($lagg['laggif'])) {
|
|
$lagg['laggif'] = "lagg{$i}";
|
|
}
|
|
/* XXX: Maybe we should report any errors?! */
|
|
interface_lagg_configure($lagg);
|
|
$i++;
|
|
}
|
|
}
|
|
}
|
|
|
|
function interface_lagg_configure(&$lagg) {
|
|
global $config, $g;
|
|
|
|
if (!is_array($lagg))
|
|
return -1;
|
|
|
|
$members = explode(',', $lagg['members']);
|
|
if (!count($members))
|
|
return -1;
|
|
|
|
$checklist = get_interface_list();
|
|
|
|
$cmd = "";
|
|
foreach ($members as $member) {
|
|
if (!array_key_exists($member, $checklist))
|
|
continue;
|
|
$realif = escapeshellarg($member);
|
|
$mtu = get_interface_mtu($realif);
|
|
/* make sure the parent interface is up */
|
|
mwexec("/sbin/ifconfig {$realif} mtu {$mtu} up");
|
|
$cmd .= " laggport {$realif}";
|
|
}
|
|
|
|
if ($g['booting'] || !(empty($lagg['laggif']))) {
|
|
mwexec("/sbin/ifconfig {$lagg['laggif']} destroy");
|
|
mwexec("/sbin/ifconfig {$lagg['laggif']} create");
|
|
$laggif = $lagg['laggif'];
|
|
} else
|
|
$laggif = exec("/sbin/ifconfig lagg create");
|
|
|
|
|
|
mwexec("/sbin/ifconfig {$laggif} {$lagg['proto']}");
|
|
|
|
/* Add interfaces to lagg */
|
|
mwexec("/sbin/ifconfig {$laggif} {$cmd}");
|
|
|
|
mwexec("/sbin/ifconfig {$laggif} up");
|
|
|
|
return $laggif;
|
|
}
|
|
|
|
function interfaces_gre_configure() {
|
|
global $config;
|
|
|
|
$i = 0;
|
|
if (is_array($config['gres']['gre']) && count($config['gres']['gre'])) {
|
|
foreach ($config['gres']['gre'] as $gre) {
|
|
if(empty($gre['greif'])) {
|
|
$gre['greif'] = "gre{$i}";
|
|
}
|
|
/* XXX: Maybe we should report any errors?! */
|
|
interface_gre_configure($gre);
|
|
$i++;
|
|
}
|
|
}
|
|
}
|
|
|
|
function interface_gre_configure(&$gre) {
|
|
global $config, $g;
|
|
|
|
if (!is_array($gre))
|
|
return -1;
|
|
|
|
$realif = get_real_wan_interface($gre['if']);
|
|
$realifip = get_current_wan_address($gre['if']);
|
|
|
|
/* make sure the parent interface is up */
|
|
mwexec("/sbin/ifconfig " . escapeshellarg($if) . " up");
|
|
|
|
if ($g['booting'] || !(empty($gre['greif']))) {
|
|
mwexec("/sbin/ifconfig {$gre['greif']} destroy");
|
|
mwexec("/sbin/ifconfig {$gre['greif']} create");
|
|
$greif = $gre['greif'];
|
|
} else
|
|
$greif = exec("/sbin/ifconfig gre create");
|
|
|
|
/* Do not change the order here for more see gre(4) NOTES section. */
|
|
mwexec("/sbin/ifconfig {$greif} tunnel {$realifip} {$gre['remote-addr']}");
|
|
mwexec("/sbin/ifconfig {$greif} {$gre['tunnel-local-addr']} {$gre['tunnel-remote-addr']} netmask 255.255.255.255 ");
|
|
if (isset($gre['link0']) && $gre['link0'])
|
|
mwexec("/sbin/ifconfig {$greif} link0");
|
|
if (isset($gre['link1']) && $gre['link1'])
|
|
mwexec("/sbin/ifconfig {$greif} link1");
|
|
if (isset($gre['link2']) && $gre['link2'])
|
|
mwexec("/sbin/ifconfig {$greif} link2");
|
|
|
|
mwexec("/sbin/ifconfig {$greif} up");
|
|
mwexec("/sbin/route add {$gre['remote-addr']}/{$gre['tunnel-remote-net']} {$realifip}");
|
|
|
|
return $greif;
|
|
}
|
|
|
|
function interfaces_gif_configure() {
|
|
global $config;
|
|
|
|
$i = 0;
|
|
if (is_array($config['gifs']['gif']) && count($config['gifs']['gif'])) {
|
|
foreach ($config['gifs']['gif'] as $gif) {
|
|
if(empty($gif['gifif'])) {
|
|
$gre['gifif'] = "gif{$i}";
|
|
}
|
|
/* XXX: Maybe we should report any errors?! */
|
|
interface_gif_configure($gif);
|
|
$i++;
|
|
}
|
|
}
|
|
}
|
|
|
|
function interface_gif_configure(&$gif) {
|
|
global $config, $g;
|
|
|
|
if (!is_array($gif))
|
|
return -1;
|
|
|
|
$realif = get_real_wan_interface($gif['if']);
|
|
$realifip = get_current_wan_address($gif['if']);
|
|
|
|
/* make sure the parent interface is up */
|
|
mwexec("/sbin/ifconfig " . escapeshellarg($if) . " up");
|
|
|
|
if ($g['booting'] || !(empty($gif['gifif']))) {
|
|
mwexec("/sbin/ifconfig {$gif['gifif']} destroy");
|
|
mwexec("/sbin/ifconfig {$gif['gifif']} create");
|
|
$gifif = $gif['gifif'];
|
|
} else
|
|
$gifif = exec("/sbin/ifconfig gif create");
|
|
|
|
/* Do not change the order here for more see gif(4) NOTES section. */
|
|
mwexec("/sbin/ifconfig {$gifif} tunnel {$realifip} {$gif['remote-addr']}");
|
|
mwexec("/sbin/ifconfig {$gifif} {$gif['tunnel-local-addr']} {$gif['tunnel-remote-addr']} netmask 255.255.255.255 ");
|
|
if (isset($gif['link0']) && $gif['link0'])
|
|
mwexec("/sbin/ifconfig {$gifif} link0");
|
|
if (isset($gif['link1']) && $gif['link1'])
|
|
mwexec("/sbin/ifconfig {$gifif} link1");
|
|
|
|
mwexec("/sbin/ifconfig {$gifif} up");
|
|
mwexec("/sbin/route add {$gif['remote-addr']}/{$gif['tunnel-remote-net']} {$realifip}");
|
|
|
|
return $gifif;
|
|
}
|
|
|
|
function interfaces_lan_configure() {
|
|
global $config, $g;
|
|
|
|
$lancfg = $config['interfaces']['lan'];
|
|
|
|
/* if user has removed ip address, clear it*/
|
|
if($lancfg['ipaddr'] == "")
|
|
mwexec("/sbin/ifconfig {$lancfg['if']} delete");
|
|
|
|
/* wireless configuration? */
|
|
if (is_array($lancfg['wireless']))
|
|
interfaces_wireless_configure($lancfg['if'], $lancfg['wireless']);
|
|
|
|
/* MAC spoofing? */
|
|
if ($lancfg['spoofmac']) {
|
|
mwexec("/sbin/ifconfig " . escapeshellarg($lancfg['if']) .
|
|
" link " . escapeshellarg($lancfg['spoofmac']));
|
|
} else {
|
|
$mac = get_interface_mac_address($lancfg['if']);
|
|
if($mac == "ff:ff:ff:ff:ff:ff") {
|
|
/* this is not a valid mac address. generate a
|
|
* temporary mac address so the machine can get online.
|
|
*/
|
|
echo "Generating new MAC address.";
|
|
$random_mac = generate_random_mac_address();
|
|
mwexec("/sbin/ifconfig " . escapeshellarg($lancfg['if']) .
|
|
" link " . escapeshellarg($random_mac));
|
|
$lancfg['spoofmac'] = $random_mac;
|
|
write_config();
|
|
file_notice("MAC Address altered", "The INVALID MAC address (ff:ff:ff:ff:ff:ff) on interface {$lancfg['if']} has been automatically replaced with {$random_mac}", "Interfaces");
|
|
}
|
|
}
|
|
|
|
/* media */
|
|
if ($lancfg['media'] || $lancfg['mediaopt']) {
|
|
$cmd = "/sbin/ifconfig " . escapeshellarg($lancfg['if']);
|
|
if ($lancfg['media'])
|
|
$cmd .= " media " . escapeshellarg($lancfg['media']);
|
|
if ($lancfg['mediaopt'])
|
|
$cmd .= " mediaopt " . escapeshellarg($lancfg['mediaopt']);
|
|
mwexec($cmd);
|
|
}
|
|
|
|
mwexec("/sbin/ifconfig " . escapeshellarg($lancfg['if']) . " " .
|
|
escapeshellarg($lancfg['ipaddr'] . "/" . $lancfg['subnet']));
|
|
|
|
if (!$g['booting']) {
|
|
/* make new hosts file */
|
|
system_hosts_generate();
|
|
|
|
/* reconfigure static routes (kernel may have deleted them) */
|
|
system_routing_configure();
|
|
|
|
/* set the reload filter dity flag */
|
|
touch("{$g['tmp_path']}/filter_dirty");
|
|
|
|
/* reload IPsec tunnels */
|
|
vpn_ipsec_configure();
|
|
|
|
/* reload dhcpd (gateway may have changed) */
|
|
services_dhcpd_configure();
|
|
|
|
/* reload dnsmasq */
|
|
services_dnsmasq_configure();
|
|
|
|
/* reload captive portal */
|
|
captiveportal_configure();
|
|
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
function interfaces_configure() {
|
|
global $g;
|
|
|
|
$iflist = get_configured_interface_with_descr();
|
|
|
|
foreach($iflist as $if => $ifname) {
|
|
if ($g['booting'])
|
|
echo "Configuring {$ifname} interface...";
|
|
if($debug)
|
|
log_error("Configuring {$ifname}");
|
|
|
|
if ($if == "lan")
|
|
interfaces_lan_configure();
|
|
else
|
|
interfaces_wan_configure($if);
|
|
if ($g['booting'])
|
|
echo "done.\n";
|
|
}
|
|
|
|
if (!$g['booting']) {
|
|
/* reconfigure static routes (kernel may have deleted them) */
|
|
system_routing_configure();
|
|
|
|
/* reload IPsec tunnels */
|
|
vpn_ipsec_configure();
|
|
|
|
/* reload dhcpd (interface enabled/disabled/bridged status may have changed) */
|
|
services_dhcpd_configure();
|
|
|
|
/* restart dnsmasq */
|
|
services_dnsmasq_configure();
|
|
|
|
/* reload captive portal */
|
|
captiveportal_configure();
|
|
|
|
/* set the reload filter dity flag */
|
|
touch("{$g['tmp_path']}/filter_dirty");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
function interface_bring_down($interface) {
|
|
global $config;
|
|
|
|
$cfg = $config['interfaces'][$interface];
|
|
mwexec("/sbin/ifconfig " . escapeshellarg($cfg['if']) . " delete down");
|
|
}
|
|
|
|
function interfaces_ppp_configure_if($ifcfg) {
|
|
global $config;
|
|
|
|
if(file_exists("/var/run/ppp0.pid")) {
|
|
$pid = file_get_contents("/var/run/ppp0.pid");
|
|
mwexec('kill $pid');
|
|
}
|
|
|
|
mwexec("/sbin/ifconfig ppp0 down destroy");
|
|
|
|
$peerfile = "lcp-echo-failure 0\n";
|
|
$peerfile .= "lcp-echo-interval 0\n";
|
|
$peerfile .= "connect /etc/ppp/peers/ppp0-connect-chat\n";
|
|
//$peerfile .= "disconnect /etc/ppp/peers/ppp0-disconnect-chat\n";
|
|
$peerfile .= "/dev/{$ifcfg['serialport']}\n";
|
|
$peerfile .= "crtscts\n";
|
|
$peerfile .= "local\n";
|
|
$peerfile .= ":{$ifcfg['gateway']}\n";
|
|
$peerfile .= "noipdefault\n";
|
|
$peerfile .= "ipcp-accept-local\n";
|
|
$peerfile .= "novj\n";
|
|
$peerfile .= "nobsdcomp\n";
|
|
$peerfile .= "novjccomp\n";
|
|
$peerfile .= "nopcomp\n";
|
|
$peerfile .= "noaccomp\n";
|
|
$peerfile .= "noauth\n";
|
|
$peerfile .= "persist\n";
|
|
$peerfile .= "debug\n";
|
|
// KD - test
|
|
//$peerfile .= "defaultroute\n";
|
|
//$peerfile .= "nodetach\n";
|
|
// KD - so I know where to look!
|
|
$peerfile .= "# created by /etc/inc/interfaces.inc\n";
|
|
file_put_contents("/etc/ppp/peers/ppp0", $peerfile);
|
|
|
|
// Added single quotes to some strings below:
|
|
// the \rAT is *always* going to need it
|
|
// and the phone number on a GSM connection ends in a # char
|
|
// Kevin Dawson, 22 Jan 2008
|
|
// Refer Andrew Curtis
|
|
|
|
$chatfile = "#!/bin/sh\n";
|
|
$chatfile .= "exec chat \\\n";
|
|
$chatfile .= "TIMEOUT 5 \\\n";
|
|
$chatfile .= "ECHO ON \\\n";
|
|
$chatfile .= "ABORT '\\nBUSY\\r' \\\n";
|
|
$chatfile .= "ABORT '\\nERROR\\r' \\\n";
|
|
$chatfile .= "ABORT '\\nNO ANSWER\\r' \\\n";
|
|
$chatfile .= "ABORT '\\nNO CARRIER\\r' \\\n";
|
|
$chatfile .= "ABORT '\\nNO DIALTONE\\r' \\\n";
|
|
$chatfile .= "ABORT '\\nRINGING\\r\\n\\r\\nRINGING\\r' \\\n";
|
|
// KD
|
|
$chatfile .= "'' '\\rAT' \\\n";
|
|
$chatfile .= "TIMEOUT 12 \\\n";
|
|
$chatfile .= "OK ATH \\\n";
|
|
$chatfile .= "OK ATE1 \\\n";
|
|
$chatfile .= "OK 'AT+CGDCONT=1,\"IP\",\"{$ifcfg['ap']}\"' \\\n";
|
|
// KD
|
|
$chatfile .= "OK 'ATD{$ifcfg['phone']}' \\\n";
|
|
$chatfile .= "TIMEOUT 22 \\\n";
|
|
$chatfile .= "CONNECT \"\" \\\n";
|
|
$chatfile .= "SAY \"\\nConnected.\"\n";
|
|
file_put_contents("/etc/ppp/peers/ppp0-connect-chat", $chatfile);
|
|
chmod("/etc/ppp/peers/ppp0-connect-chat", 0755);
|
|
mwexec("/sbin/ifconfig ppp0 create");
|
|
return 0;
|
|
}
|
|
|
|
function interfaces_carp_configure() {
|
|
global $g, $config, $debugging;
|
|
$balanacing = "";
|
|
$pfsyncinterface = "";
|
|
$pfsyncenabled = "";
|
|
if(isset($config['system']['developerspew'])) {
|
|
$mt = microtime();
|
|
echo "interfaces_carp_configure() being called $mt\n";
|
|
}
|
|
$carp_instances_counter = 0;
|
|
$total_carp_interfaces_defined = find_number_of_created_carp_interfaces();
|
|
/* destroy previous interfaces */
|
|
for($x=0; $x<$total_carp_interfaces_defined; $x++)
|
|
mwexec("/sbin/ifconfig carp{$x} delete");
|
|
if ($g['booting']) {
|
|
echo "Configuring CARP interfaces...";
|
|
mute_kernel_msgs();
|
|
}
|
|
/* suck in configuration items */
|
|
if($config['installedpackages']['carpsettings'])
|
|
if($config['installedpackages']['carpsettings']['config']) {
|
|
foreach($config['installedpackages']['carpsettings']['config'] as $carp) {
|
|
$pfsyncenabled = $carp['pfsyncenabled'];
|
|
$balanacing = $carp['balancing'];
|
|
$pfsyncinterface = $carp['pfsyncinterface'];
|
|
$pfsyncpeerip = $carp['pfsyncpeerip'];
|
|
}
|
|
} else {
|
|
unset($pfsyncinterface);
|
|
unset($balanacing);
|
|
unset($pfsyncenabled);
|
|
}
|
|
mwexec("/sbin/sysctl net.inet.carp.allow=1");
|
|
if($balanacing) {
|
|
mwexec("/sbin/sysctl net.inet.carp.arpbalance=1");
|
|
mwexec("/sbin/sysctl net.inet.carp.preempt=0");
|
|
} else {
|
|
mwexec("/sbin/sysctl net.inet.carp.preempt=1");
|
|
}
|
|
mwexec("/sbin/sysctl net.inet.carp.log=2"); // tell syslog about state changes
|
|
$carp_sync_int = convert_friendly_interface_to_real_interface_name($pfsyncinterface);
|
|
if($g['booting']) {
|
|
/* install rules to alllow pfsync to sync up during boot
|
|
* carp interfaces will remain down until the bootup sequence finishes
|
|
*/
|
|
exec("echo pass quick proto carp all keep state > /tmp/rules.boot");
|
|
exec("echo pass quick proto pfsync all >> /tmp/rules.boot");
|
|
exec("echo pass out quick from any to any keep state >> /tmp/rules.boot");
|
|
// exec("/sbin/pfctl -f /tmp/rules.boot");
|
|
}
|
|
/* setup pfsync interface */
|
|
if($carp_sync_int and $pfsyncenabled) {
|
|
if($pfsyncpeerip) {
|
|
mwexec("/sbin/ifconfig pfsync0 syncdev {$carp_sync_int} syncpeer {$pfsyncpeerip} up");
|
|
} else {
|
|
mwexec("/sbin/ifconfig pfsync0 syncdev {$carp_sync_int} up");
|
|
}
|
|
} else {
|
|
mwexec("/sbin/ifconfig pfsync0 syncdev lo0 up");
|
|
}
|
|
//$fd = fopen("/tmp/carp.sh", "w");
|
|
$viparr = &$config['virtualip']['vip'];
|
|
if($config['virtualip']['vip']) {
|
|
mwexec("/sbin/sysctl net.inet.carp.allow=1");
|
|
} else {
|
|
$viparr = array();
|
|
mwexec("/sbin/sysctl net.inet.carp.allow=0");
|
|
}
|
|
if(!$viparr and $config['interfaces']['wan']['ipaddr'] == "carpdev-dhcp") {
|
|
/* no vips exist but we need to bring up carpdev... */
|
|
$viparr_temp = array();
|
|
$viparr_temp['advskew'] = "200";
|
|
$viparr_temp['vhid'] = "1";
|
|
$viparr_temp['mode'] = "carpdev-dhcp";
|
|
$viparr_temp['password'] = $config['system']['hostname'] . "pfS";
|
|
$viparr = $viparr_temp;
|
|
}
|
|
if(is_array($viparr))
|
|
foreach ($viparr as $vip) {
|
|
$vip_password = $vip['password'];
|
|
$vip_password = str_replace(" ", "", $vip_password);
|
|
if($vip['password'] != "")
|
|
$password = " pass \"" . $vip_password . "\"";
|
|
$interface = filter_translate_type_to_real_interface($vip['interface']);
|
|
$carpint = "carp" . $carp_instances_counter;
|
|
|
|
switch ($vip['mode']) {
|
|
case "carp":
|
|
/* ensure CARP IP really exists prior to loading up */
|
|
$found = false;
|
|
$iflist = get_configured_interface_list();
|
|
foreach($iflist as $if) {
|
|
$ww_subnet_ip = $config['interfaces'][$if]['ipaddr'];
|
|
$ww_subnet_bits = $config['interfaces'][$if]['subnet'];
|
|
if (ip_in_subnet($vip['subnet'], gen_subnet($ww_subnet_ip, $ww_subnet_bits) . "/" . $ww_subnet_bits))
|
|
$found = true;
|
|
}
|
|
if($found == false) {
|
|
file_notice("CARP", "Sorry but we could not find a matching real interface subnet for the virtual IP address {$vip['subnet']}.", "Firewall: Virtual IP", "");
|
|
continue;
|
|
}
|
|
/* create the carp interface and setup */
|
|
mwexec("/sbin/ifconfig {$carpint} create");
|
|
|
|
/* invalidate interface cache */
|
|
get_interface_arr(true);
|
|
$broadcast_address = gen_subnet_max($vip['subnet'], $vip['subnet_bits']);
|
|
mwexec("/sbin/ifconfig {$carpint} " . $vip['subnet'] . "/" . $vip['subnet_bits'] . " broadcast " . $broadcast_address . " vhid " . $vip['vhid'] . " advskew " . $vip['advskew'] . $password);
|
|
mwexec("/sbin/ifconfig {$carpint} up");
|
|
$carp_instances_counter++;
|
|
usleep(10);
|
|
break;
|
|
case "carpdev-dhcp":
|
|
log_error("Found carpdev interface {$vip['interface']} on top of interface {$interface}");
|
|
if(!empty($interface)) {
|
|
mwexec("/sbin/ifconfig {$interface} up");
|
|
mwexec("/sbin/ifconfig {$carpint} create");
|
|
sleep(3);
|
|
mwexec("/sbin/ifconfig {$carpint} carpdev ". $interface . " vhid " . $vip['vhid'] . " advskew " . $vip['advskew'] . $password);
|
|
mwexec("/sbin/ifconfig {$carpint} up");
|
|
/*
|
|
* XXX: BIG HACK but carpdev needs ip services active
|
|
* before even starting something as dhclient.
|
|
* I do not know if this is a feature or a bug
|
|
* but better than track it make it work ;) .
|
|
*/
|
|
$fakeiptouse = "10.254.254." . ($carp_instances_counter+1);
|
|
mwexec("/sbin/ifconfig {$carpint} inet {$fakeiptouse}");
|
|
|
|
sleep(3);
|
|
/* generate dhclient_wan.conf */
|
|
$fd = fopen("{$g['varetc_path']}/dhclient_{$carpint}.conf", "w");
|
|
if ($fd) {
|
|
|
|
$dhclientconf = "";
|
|
|
|
$dhclientconf .= <<<EOD
|
|
interface "{$carpint}" {
|
|
timeout 60;
|
|
retry 1;
|
|
select-timeout 0;
|
|
initial-interval 1;
|
|
script "/sbin/dhclient-script";
|
|
}
|
|
|
|
EOD;
|
|
|
|
fwrite($fd, $dhclientconf);
|
|
fclose($fd);
|
|
|
|
/* fire up dhclient */
|
|
mwexec("/sbin/dhclient -c {$g['varetc_path']}/dhclient_{$carpint}.conf {$carpint} >/tmp/{$carpint}_output >/tmp/{$carpint}_error_output");
|
|
} else {
|
|
log_error("Error: cannot open dhclient_{$carpint}.conf in interfaces_carp_configure() for writing.\n");
|
|
mwexec("/sbin/dhclient -b {$carpint}");
|
|
}
|
|
|
|
|
|
$fout = fopen("/tmp/ifconfig_{$carpint}","w");
|
|
fwrite($fout, "/sbin/dhclient -c {$g['varetc_path']}/dhclient_{$carpint}.conf {$carpint}");
|
|
|
|
fclose($fout);
|
|
|
|
} else {
|
|
log_error("Could not determine CarpDEV parent interface for {$vip['descr']}.");
|
|
}
|
|
$carp_instances_counter++;
|
|
usleep(10);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if ($g['booting']) {
|
|
unmute_kernel_msgs();
|
|
echo "done.\n";
|
|
}
|
|
|
|
/* update cache */
|
|
if ($carp_instances_counter != find_number_of_created_carp_interfaces())
|
|
find_number_of_created_carp_interfaces(true);
|
|
}
|
|
|
|
function interfaces_ipalias_configure() {
|
|
global $g, $config, $debugging;
|
|
if(isset($config['system']['developerspew'])) {
|
|
$mt = microtime();
|
|
echo "interfaces_ipalias_configure() being called $mt\n";
|
|
}
|
|
$viparr = &$config['virtualip']['vip'];
|
|
if(is_array($viparr)) {
|
|
foreach ($viparr as $vip) {
|
|
if ($vip['mode'] == "ipalias") {
|
|
$if = $vip['interface'];
|
|
mwexec("/sbin/ifconfig " . escapeshellarg($config['interfaces'][$if]['if']) . " " . $vip['subnet'] . "/" . escapeshellarg($vip['subnet_bits']) . " alias");
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
function interfaces_wireless_configure($if, $wlcfg) {
|
|
global $config, $g;
|
|
|
|
/* open up a shell script that will be used to output the commands.
|
|
* since wireless is changing a lot, these series of commands are fragile
|
|
* and will sometimes need to be verified by a operator by executing the command
|
|
* and returning the output of the command to the developers for inspection. please
|
|
* do not change this routine from a shell script to individul exec commands. -sullrich
|
|
*/
|
|
|
|
conf_mount_rw();
|
|
|
|
unlink_if_exists("{$g['tmp_path']}/{$if}_setup.sh");
|
|
|
|
$fd_set = fopen("/tmp/{$if}_setup.sh","w");
|
|
fwrite($fd_set, "#!/bin/sh\n");
|
|
fwrite($fd_set, "# {$g['product_name']} wireless configuration script.\n\n");
|
|
|
|
fwrite($fd_set, "# enable shell debugging\n");
|
|
fwrite($fd_set, "set -x\n");
|
|
|
|
/* set values for /path/program */
|
|
$hostapd = "/usr/sbin/hostapd";
|
|
$wpa_supplicant = "/usr/sbin/wpa_supplicant";
|
|
$ifconfig = "/sbin/ifconfig";
|
|
$killall = "/usr/bin/killall";
|
|
|
|
/* Set all wireless ifconfig variables (splitt up to get rid of needed checking) */
|
|
|
|
/* Set a/b/g standard */
|
|
$standard = "mode " . escapeshellarg($wlcfg['standard']);
|
|
|
|
/* Set 802.11g protection mode */
|
|
$protmode = "protmode " . escapeshellarg($wlcfg['protmode']);
|
|
|
|
/* set wireless channel value */
|
|
if(isset($wlcfg['channel']))
|
|
$channel = "channel " . escapeshellarg($wlcfg['channel']);
|
|
|
|
/* set Distance value */
|
|
if($wlcfg['distance'])
|
|
$distance = escapeshellarg($wlcfg['distance']);
|
|
|
|
/* Set ssid */
|
|
if($wlcfg['ssid'])
|
|
$ssid = "ssid " . escapeshellarg($wlcfg['ssid']);
|
|
|
|
/* Set wireless hostap mode */
|
|
if ($wlcfg['mode'] == "hostap")
|
|
$hostapmode = "mediaopt hostap";
|
|
else
|
|
$hostapmode = "-mediaopt hostap";
|
|
|
|
/* Set wireless adhoc mode */
|
|
if ($wlcfg['mode'] == "adhoc")
|
|
$adhocmode = "mediaopt adhoc";
|
|
else
|
|
$adhocmode = "-mediaopt adhoc";
|
|
|
|
/* Not neccesary to set BSS mode as this is default if adhoc and/or hostap is NOT set */
|
|
|
|
/* handle hide ssid option */
|
|
if(isset($wlcfg['hidessid']['enable']))
|
|
$hidessid = "hidessid";
|
|
else
|
|
$hidessid = "-hidessid";
|
|
|
|
/* handle pureg (802.11g) only option */
|
|
if(isset($wlcfg['pureg']['enable']))
|
|
$pureg = "mode 11g pureg";
|
|
else
|
|
$pureg = "-pureg";
|
|
|
|
/* enable apbridge option */
|
|
if(isset($wlcfg['apbridge']['enable']))
|
|
$apbridge = "apbridge";
|
|
else
|
|
$apbridge = "-apbridge";
|
|
|
|
/* handle turbo option */
|
|
if(isset($wlcfg['turbo']['enable']))
|
|
$turbo = "mediaopt turbo";
|
|
else
|
|
$turbo = "-mediaopt turbo";
|
|
|
|
/* handle txpower setting */
|
|
if($wlcfg['txpower'] <> "")
|
|
$txpower = "txpower " . escapeshellarg($wlcfg['txpower']);
|
|
|
|
/* handle wme option */
|
|
if(isset($wlcfg['wme']['enable']))
|
|
$wme = "wme";
|
|
else
|
|
$wme = "-wme";
|
|
|
|
/* set up wep if enabled */
|
|
if (isset($wlcfg['wep']['enable']) && is_array($wlcfg['wep']['key'])) {
|
|
if($wlcfg['wpa']['auth_algs'] == "1")
|
|
$wepset .= "authmode open wepmode on ";
|
|
else if($wlcfg['wpa']['auth_algs'] == "2")
|
|
$wepset .= "authmode shared wepmode on ";
|
|
else if($wlcfg['wpa']['auth_algs'] == "3")
|
|
$wepset .= "authmode mixed wepmode on ";
|
|
$i = 1;
|
|
foreach ($wlcfg['wep']['key'] as $wepkey) {
|
|
$wepset .= "wepkey " . escapeshellarg("{$i}:{$wepkey['value']}") . " ";
|
|
if (isset($wepkey['txkey']))
|
|
$wepset .= "weptxkey {$i} ";
|
|
$i++;
|
|
}
|
|
} else {
|
|
$wepset .= "authmode open wepmode off ";
|
|
}
|
|
|
|
/* generate wpa_supplicant/hostap config if wpa is enabled */
|
|
|
|
switch ($wlcfg['mode']) {
|
|
case 'bss':
|
|
if (isset($wlcfg['wpa']['enable'])) {
|
|
|
|
$wpa .= <<<EOD
|
|
ctrl_interface={$g['varrun_path']}/wpa_supplicant
|
|
ctrl_interface_group=0
|
|
ap_scan=1
|
|
#fast_reauth=1
|
|
network={
|
|
ssid="{$wlcfg['ssid']}"
|
|
scan_ssid=1
|
|
priority=5
|
|
key_mgmt={$wlcfg['wpa']['wpa_key_mgmt']}
|
|
psk="{$wlcfg['wpa']['passphrase']}"
|
|
pairwise={$wlcfg['wpa']['wpa_pairwise']}
|
|
group={$wlcfg['wpa']['wpa_pairwise']}
|
|
}
|
|
EOD;
|
|
|
|
$fd = fopen("{$g['varetc_path']}/wpa_supplicant_{$if}.conf", "w");
|
|
fwrite($fd, "{$wpa}");
|
|
fclose($fd);
|
|
|
|
fwrite($fd_set, kill_wpasupplicant($if));
|
|
}
|
|
break;
|
|
|
|
case 'hostap':
|
|
if (isset($wlcfg['wpa']['enable'])) {
|
|
$wpa .= <<<EOD
|
|
interface={$if}
|
|
driver=bsd
|
|
logger_syslog=-1
|
|
logger_syslog_level=0
|
|
logger_stdout=-1
|
|
logger_stdout_level=0
|
|
dump_file={$g['tmp_path']}/hostapd_{$if}.dump
|
|
ctrl_interface={$g['varrun_path']}/hostapd
|
|
ctrl_interface_group=wheel
|
|
#accept_mac_file={$g['tmp_path']}/hostapd_{$if}.accept
|
|
#deny_mac_file={$g['tmp_path']}/hostapd_{$if}.deny
|
|
#macaddr_acl={$wlcfg['wpa']['macaddr_acl']}
|
|
ssid={$wlcfg['ssid']}
|
|
debug={$wlcfg['wpa']['debug_mode']}
|
|
auth_algs={$wlcfg['wpa']['auth_algs']}
|
|
wpa={$wlcfg['wpa']['wpa_mode']}
|
|
wpa_key_mgmt={$wlcfg['wpa']['wpa_key_mgmt']}
|
|
wpa_pairwise={$wlcfg['wpa']['wpa_pairwise']}
|
|
wpa_group_rekey={$wlcfg['wpa']['wpa_group_rekey']}
|
|
wpa_gmk_rekey={$wlcfg['wpa']['wpa_gmk_rekey']}
|
|
wpa_strict_rekey={$wlcfg['wpa']['wpa_strict_rekey']}
|
|
wpa_passphrase={$wlcfg['wpa']['passphrase']}
|
|
ieee8021x={$wlcfg['wpa']['ieee8021x']}
|
|
#Enable the next lines for preauth when roaming. Interface = wired or wireless interface talking to the AP you want to roam from/to
|
|
#rsn_preauth=1
|
|
#rsn_preauth_interfaces=eth0
|
|
EOD;
|
|
|
|
$fd = fopen("{$g['varetc_path']}/hostapd_{$if}.conf", "w");
|
|
fwrite($fd, "{$wpa}");
|
|
fclose($fd);
|
|
|
|
fwrite($fd_set, kill_hostapd($if));
|
|
}
|
|
break;
|
|
|
|
case 'adhoc':
|
|
fwrite($fd_set, kill_hostapd($if));
|
|
fwrite($fd_set, kill_wpasupplicant($if));
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* all variables are set, lets start up everything
|
|
*/
|
|
|
|
/* set ack timers according to users preference (if he/she has any) */
|
|
if($distance) {
|
|
fwrite($fd_set, "# Enable ATH distance settings\n");
|
|
fwrite($fd_set, "/sbin/athctrl.sh -i {$if} -d {$distance}\n");
|
|
}
|
|
|
|
$standard_no_turbo = str_replace(" Turbo", "", $standard);
|
|
|
|
if($channel == "0")
|
|
$channel = "auto";
|
|
|
|
$settings = <<<EOD
|
|
|
|
{$ifconfig} {$if} down
|
|
{$ifconfig} {$if} {$hostapmode}
|
|
{$ifconfig} {$if} {$standard_no_turbo}
|
|
{$ifconfig} {$if} {$channel}
|
|
{$ifconfig} {$if} {$turbo}
|
|
{$ifconfig} {$if} {$ssid}
|
|
{$ifconfig} {$if} {$hidessid}
|
|
{$ifconfig} {$if} {$adhocmode}
|
|
{$ifconfig} {$if} {$protmode}
|
|
{$ifconfig} {$if} {$pureg}
|
|
{$ifconfig} {$if} {$apbridge}
|
|
{$ifconfig} {$if} {$wme}
|
|
{$ifconfig} {$if} {$wepset}
|
|
{$ifconfig} {$if} {$txpower}
|
|
{$ifconfig} {$if} up
|
|
|
|
EOD;
|
|
|
|
/* write out above <<EOD stuff */
|
|
fwrite($fd_set, $settings);
|
|
|
|
if (isset($wlcfg['wpa']['enable'])) {
|
|
if ($wlcfg['mode'] == "bss")
|
|
fwrite($fd_set, "{$wpa_supplicant} -B -i {$if} -c {$g['varetc_path']}/wpa_supplicant_{$if}.conf\n");
|
|
if ($wlcfg['mode'] == "hostap")
|
|
fwrite($fd_set, "{$hostapd} -B {$g['varetc_path']}/hostapd_{$if}.conf\n");
|
|
}
|
|
|
|
fclose($fd_set);
|
|
|
|
conf_mount_ro();
|
|
|
|
/* execute commands now in shell */
|
|
mwexec("/bin/sh /tmp/{$if}_setup.sh");
|
|
sleep(2);
|
|
mwexec("/bin/sh /tmp/{$if}_setup.sh");
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
function kill_hostapd($interface) {
|
|
return "/bin/ps awwuxx | grep hostapd | grep $interface | awk '{ print \$2 }' | xargs kill\n";
|
|
}
|
|
|
|
function kill_wpasupplicant($interface) {
|
|
return "/bin/ps awwuxx | grep wpa_supplicant | grep $interface | awk '{ print \$2 }' | xargs kill\n";
|
|
}
|
|
|
|
function find_dhclient_process($interface) {
|
|
if(filter_translate_type_to_real_interface($interface) <> "")
|
|
$realinterface = filter_translate_type_to_real_interface($interface);
|
|
if($realinterface)
|
|
$pid = `ps awwwux | grep dhclient | grep -v grep | grep {$realinterface} | awk '{ print \$2 }'`;
|
|
return $pid;
|
|
}
|
|
|
|
function interfaces_wan_configure($interface = "wan") {
|
|
global $config, $g;
|
|
|
|
$wancfg = $config['interfaces'][$interface];
|
|
|
|
$realif = get_real_wan_interface($interface);
|
|
|
|
if(file_exists("/tmp/{$wancfg['if']}_router"))
|
|
unlink("/tmp/{$wancfg['if']}_router");
|
|
|
|
if(!$g['booting']) {
|
|
mute_kernel_msgs();
|
|
|
|
/* find dhclient process for wan and kill it */
|
|
killbypid(find_dhclient_process($interface));
|
|
|
|
/* remove wanup file if it exists */
|
|
unlink_if_exists("{$g['tmp_path']}/{$interface}up");
|
|
|
|
/* kill PPPoE client (mpd) */
|
|
killbypid("{$g['varrun_path']}/pppoe_{$interface}.pid");
|
|
killbypid("{$g['varrun_path']}/pptp_{$interface}.pid");
|
|
|
|
/* wait for processes to die */
|
|
sleep(3);
|
|
|
|
unlink_if_exists("{$g['varetc_path']}/dhclient_{$interface}.conf");
|
|
unlink_if_exists("{$g['varetc_path']}/mpd_{$interface}.conf");
|
|
unlink_if_exists("{$g['varetc_path']}/mpd_{$interface}.links");
|
|
unlink_if_exists("{$g['vardb_path']}/{$interface}ip");
|
|
unlink_if_exists("{$g['varetc_path']}/nameservers.conf");
|
|
}
|
|
|
|
/* remove all addresses first */
|
|
while (mwexec("/sbin/ifconfig " . escapeshellarg($wancfg['if']) . " -alias") == 0);
|
|
mwexec("/sbin/ifconfig " . escapeshellarg($wancfg['if']) . " down");
|
|
|
|
/* wireless configuration? */
|
|
if (is_array($wancfg['wireless']))
|
|
interfaces_wireless_configure($wancfg['if'], $wancfg['wireless']);
|
|
|
|
if ($wancfg['spoofmac']) {
|
|
mwexec("/sbin/ifconfig " . escapeshellarg($wancfg['if']) .
|
|
" link " . escapeshellarg($wancfg['spoofmac']));
|
|
} else {
|
|
$mac = get_interface_mac_address($wancfg['if']);
|
|
if($mac == "ff:ff:ff:ff:ff:ff") {
|
|
/* this is not a valid mac address. generate a
|
|
* temporary mac address so the machine can get online.
|
|
*/
|
|
echo "Generating new MAC address.";
|
|
$random_mac = generate_random_mac_address();
|
|
mwexec("/sbin/ifconfig " . escapeshellarg($wancfg['if']) .
|
|
" link " . escapeshellarg($random_mac));
|
|
$wancfg['spoofmac'] = $random_mac;
|
|
write_config();
|
|
file_notice("MAC Address altered", "The INVALID MAC address (ff:ff:ff:ff:ff:ff) on interface {$wancfg['if']} has been automatically replaced with {$random_mac}", "Interfaces");
|
|
}
|
|
}
|
|
|
|
/* media */
|
|
if ($wancfg['media'] || $wancfg['mediaopt']) {
|
|
$cmd = "/sbin/ifconfig " . escapeshellarg($wancfg['if']);
|
|
if ($wancfg['media'])
|
|
$cmd .= " media " . escapeshellarg($wancfg['media']);
|
|
if ($wancfg['mediaopt'])
|
|
$cmd .= " mediaopt " . escapeshellarg($wancfg['mediaopt']);
|
|
mwexec($cmd);
|
|
}
|
|
|
|
switch ($wancfg['ipaddr']) {
|
|
|
|
case 'carpdev-dhcp':
|
|
interfaces_wan_carpdev_dhcp_configure($interface);
|
|
break;
|
|
case 'dhcp':
|
|
interfaces_wan_dhcp_configure($interface);
|
|
break;
|
|
|
|
case 'pppoe':
|
|
interfaces_wan_pppoe_configure($interface);
|
|
break;
|
|
|
|
case 'pptp':
|
|
interfaces_wan_pptp_configure($interface);
|
|
break;
|
|
|
|
case 'bigpond':
|
|
/* just configure DHCP for now; fire up bpalogin when we've got the lease */
|
|
interfaces_wan_dhcp_configure($interface);
|
|
break;
|
|
|
|
default:
|
|
if (isset($wancfg['ispointtopoint']) && $wancfg['pointtopoint']) {
|
|
mwexec("/sbin/ifconfig " . escapeshellarg($wancfg['if']) . " " .
|
|
escapeshellarg($wancfg['ipaddr'] . "/" . $wancfg['subnet']) .
|
|
" " . escapeshellarg($wancfg['pointtopoint']) . " up");
|
|
} else {
|
|
mwexec("/sbin/ifconfig " . escapeshellarg($wancfg['if']) . " " .
|
|
escapeshellarg($wancfg['ipaddr'] . "/" . $wancfg['subnet']));
|
|
}
|
|
|
|
if (is_ipaddr($wancfg['gateway']))
|
|
system("echo " . $wancfg['gateway'] . " > /tmp/" . $wancfg['if'] . "_router");
|
|
|
|
/* resync pf (done automatically for DHCP/PPPoE/PPTP) */
|
|
/* XXX: shouldn't the caller do this?! */
|
|
filter_configure();
|
|
}
|
|
|
|
/* XXX: Shouldn't the caller do this?! */
|
|
if (!$g['booting']) {
|
|
/* reconfigure static routes (kernel may have deleted them) */
|
|
system_routing_configure();
|
|
|
|
/* set the reload filter dity flag */
|
|
touch("{$g['tmp_path']}/filter_dirty");
|
|
|
|
/* reload ipsec tunnels */
|
|
vpn_ipsec_configure();
|
|
|
|
/* restart ez-ipupdate */
|
|
services_dyndns_configure();
|
|
|
|
/* force DNS update */
|
|
services_dnsupdate_process();
|
|
|
|
/* restart dnsmasq */
|
|
services_dnsmasq_configure();
|
|
|
|
/* reload captive portal */
|
|
captiveportal_configure();
|
|
}
|
|
|
|
mwexec("/sbin/ifconfig {$wancfg['if']} up");
|
|
|
|
unmute_kernel_msgs();
|
|
|
|
return 0;
|
|
}
|
|
|
|
function interfaces_opt_dhcp_configure($interface) {
|
|
global $config, $g;
|
|
|
|
$optcfg = $config['interfaces'][$interface];
|
|
$optif = $optcfg['if'];
|
|
|
|
/* generate dhclient_wan.conf */
|
|
$fd = fopen("{$g['varetc_path']}/dhclient_{$optif}.conf", "w");
|
|
if (!$fd) {
|
|
printf("Error: cannot open dhclient_{$optif}.conf in interfaces_opt_dhcp_configure({$optif}) for writing.\n");
|
|
return 1;
|
|
}
|
|
|
|
if ($optcfg['dhcphostname']) {
|
|
$dhclientconf_hostname = "send dhcp-client-identifier \"{$optcfg['dhcphostname']}\";\n";
|
|
$dhclientconf_hostname .= "\tsend host-name \"{$optcfg['dhcphostname']}\";\n";
|
|
} else {
|
|
$dhclientconf_hostname = "";
|
|
}
|
|
|
|
$dhclientconf = "";
|
|
|
|
$dhclientconf .= <<<EOD
|
|
timeout 60;
|
|
retry 1;
|
|
select-timeout 0;
|
|
initial-interval 1;
|
|
interface "{$optif}" {
|
|
script "/sbin/dhclient-script";
|
|
{$dhclientconf_hostname}
|
|
}
|
|
|
|
EOD;
|
|
|
|
if(is_ipaddr($optcfg['alias-address'])) {
|
|
$subnetmask = gen_subnet_mask($optcfg['alias-subnet']);
|
|
$dhclientconf .= <<<EOD
|
|
alias {
|
|
interface "{$optif}";
|
|
fixed-address {$optcfg['alias-address']};
|
|
option subnet-mask {$subnetmask};
|
|
}
|
|
|
|
EOD;
|
|
}
|
|
fwrite($fd, $dhclientconf);
|
|
fclose($fd);
|
|
|
|
/* bring interface up before starting dhclient */
|
|
mwexec("/sbin/ifconfig {$optif} up");
|
|
|
|
/* fire up dhclient */
|
|
mwexec("/sbin/dhclient -c {$g['varetc_path']}/dhclient_{$optif}.conf {$optif}");
|
|
|
|
return 0;
|
|
}
|
|
|
|
function interfaces_dhcp_configure($interface) {
|
|
global $config, $g;
|
|
|
|
if(filter_translate_type_to_real_interface($interface) <> "")
|
|
$realinterface = filter_translate_type_to_real_interface($interface);
|
|
|
|
$optcfg = $config['interfaces'][$interface];
|
|
|
|
/* generate dhclient_$interface.conf */
|
|
$fd = fopen("{$g['varetc_path']}/dhclient_{$interface}.conf", "w");
|
|
if (!$fd) {
|
|
printf("Error: cannot open dhclient_{$interface}.conf in interfaces_dhcp_configure({$$interface}) for writing.\n");
|
|
return 1;
|
|
}
|
|
|
|
if ($optcfg['dhcphostname']) {
|
|
$dhclientconf_hostname = "send dhcp-client-identifier \"{$optcfg['dhcphostname']}\";\n";
|
|
$dhclientconf_hostname .= "\tsend host-name \"{$optcfg['dhcphostname']}\";\n";
|
|
} else {
|
|
$dhclientconf_hostname = "";
|
|
}
|
|
|
|
$dhclientconf = "";
|
|
|
|
$dhclientconf .= <<<EOD
|
|
timeout 60;
|
|
retry 1;
|
|
select-timeout 0;
|
|
initial-interval 1;
|
|
interface "{$realinterface}" {
|
|
{$dhclientconf_hostname}
|
|
script "/sbin/dhclient-script";
|
|
}
|
|
|
|
EOD;
|
|
|
|
if(is_ipaddr($optcfg['alias-address'])) {
|
|
$subnetmask = gen_subnet_mask($optcfg['alias-subnet']);
|
|
$dhclientconf .= <<<EOD
|
|
alias {
|
|
interface "{$optif}";
|
|
fixed-address {$optcfg['alias-address']};
|
|
option subnet-mask {$subnetmask};
|
|
}
|
|
|
|
EOD;
|
|
}
|
|
|
|
fwrite($fd, $dhclientconf);
|
|
fclose($fd);
|
|
|
|
$optif = $optcfg['if'];
|
|
|
|
/* bring wan interface up before starting dhclient */
|
|
mwexec("/sbin/ifconfig {$optif} up");
|
|
|
|
/* fire up dhclient */
|
|
mwexec("/sbin/dhclient -c {$g['varetc_path']}/dhclient_{$optif}.conf {$optif} >/tmp/{$optif}_output >/tmp/{$optif}_error_output");
|
|
|
|
$fout = fopen("/tmp/ifconfig_{$optif}","w");
|
|
fwrite($fout, "/sbin/dhclient -c {$g['varetc_path']}/dhclient_{$optif}.conf {$optif}");
|
|
fclose($fout);
|
|
|
|
return 0;
|
|
}
|
|
|
|
function interfaces_wan_carpdev_dhcp_configure($interface = "wan") {
|
|
global $config, $g;
|
|
|
|
$wancfg = $config['interfaces'][$interface];
|
|
$wanif = $wancfg['if'];
|
|
/* bring wan interface up before starting dhclient */
|
|
mwexec("/sbin/ifconfig {$wanif} up");
|
|
|
|
return 0;
|
|
}
|
|
|
|
function interfaces_wan_dhcp_configure($interface = "wan") {
|
|
global $config, $g;
|
|
|
|
$wancfg = $config['interfaces'][$interface];
|
|
|
|
/* generate dhclient_wan.conf */
|
|
$fd = fopen("{$g['varetc_path']}/dhclient_{$interface}.conf", "w");
|
|
if (!$fd) {
|
|
printf("Error: cannot open dhclient_{$interface}.conf in interfaces_wan_dhcp_configure() for writing.\n");
|
|
return 1;
|
|
}
|
|
|
|
if ($wancfg['dhcphostname']) {
|
|
$dhclientconf_hostname = "send dhcp-client-identifier \"{$wancfg['dhcphostname']}\";\n";
|
|
$dhclientconf_hostname .= "\tsend host-name \"{$wancfg['dhcphostname']}\";\n";
|
|
} else {
|
|
$dhclientconf_hostname = "";
|
|
}
|
|
|
|
$wanif = get_real_wan_interface($interface);
|
|
|
|
$dhclientconf = "";
|
|
|
|
$dhclientconf .= <<<EOD
|
|
interface "{$wanif}" {
|
|
timeout 60;
|
|
retry 1;
|
|
select-timeout 0;
|
|
initial-interval 1;
|
|
{$dhclientconf_hostname}
|
|
script "/sbin/dhclient-script";
|
|
}
|
|
|
|
EOD;
|
|
|
|
if(is_ipaddr($wancfg['alias-address'])) {
|
|
$subnetmask = gen_subnet_mask($wancfg['alias-subnet']);
|
|
$dhclientconf .= <<<EOD
|
|
alias {
|
|
interface "{$wanif}";
|
|
fixed-address {$wancfg['alias-address']};
|
|
option subnet-mask {$subnetmask};
|
|
}
|
|
|
|
EOD;
|
|
}
|
|
fwrite($fd, $dhclientconf);
|
|
fclose($fd);
|
|
|
|
$relwanif = $wancfg['if'];
|
|
|
|
/* bring wan interface up before starting dhclient */
|
|
mwexec("/sbin/ifconfig {$realwanif} up");
|
|
|
|
/* fire up dhclient */
|
|
mwexec("/sbin/dhclient -c {$g['varetc_path']}/dhclient_{$interface}.conf {$wanif} >/tmp/{$wanif}_output >/tmp/{$wanif}_error_output");
|
|
|
|
$fout = fopen("/tmp/ifconfig_{$wanif}","w");
|
|
fwrite($fout, "/sbin/dhclient -c {$g['varetc_path']}/dhclient_{$interface}.conf {$wanif}");
|
|
fclose($fout);
|
|
|
|
return 0;
|
|
}
|
|
|
|
function interfaces_wan_dhcp_down($interface = "wan") {
|
|
global $config;
|
|
$wancfg = $config['interfaces'][$interface];
|
|
$wanif = $wancfg['if'];
|
|
mwexec("/sbin/ifconfig {$wanif} delete");
|
|
sleep(1);
|
|
}
|
|
|
|
function interfaces_dhcp_down($interface) {
|
|
global $config;
|
|
if(filter_translate_type_to_real_interface($interface) <> "")
|
|
$realinterface = filter_translate_type_to_real_interface($interface);
|
|
mwexec("/sbin/ifconfig {$realinterface} down");
|
|
sleep(1);
|
|
$pid = find_dhclient_process($interface);
|
|
if($pid)
|
|
mwexec("kill {$pid}");
|
|
}
|
|
|
|
function interfaces_dhcp_up($interface = "wan") {
|
|
interfaces_dhcp_configure($interface);
|
|
sleep(1);
|
|
}
|
|
|
|
function interfaces_wan_dhcp_up($interface = "wan") {
|
|
interfaces_wan_dhcp_configure($interface);
|
|
sleep(1);
|
|
}
|
|
|
|
function interfaces_wan_pppoe_configure($interface = "wan") {
|
|
global $config, $g;
|
|
|
|
$wancfg = $config['interfaces'][$interface];
|
|
|
|
/* generate mpd.conf */
|
|
$fd = fopen("{$g['varetc_path']}/mpd_{$interface}.conf", "w");
|
|
if (!$fd) {
|
|
printf("Error: cannot open mpd_{$interface}.conf in interfaces_wan_pppoe_configure().\n");
|
|
return 1;
|
|
}
|
|
|
|
$idle = 0;
|
|
|
|
if (isset($wancfg['ondemand'])) {
|
|
$ondemand = "enable";
|
|
if ($wancfg['timeout'])
|
|
$idle = $wancfg['timeout'];
|
|
} else {
|
|
$ondemand = "disable";
|
|
}
|
|
|
|
$mpdconf = <<<EOD
|
|
startup:
|
|
pppoeclient:
|
|
|
|
EOD;
|
|
|
|
if ($interface == "wan")
|
|
$realif = "pppoe0";
|
|
else {
|
|
// Here code assumes only that strings of form "opt#" will be passed.
|
|
$realif = "pppoe" . substr($interface, 3);
|
|
}
|
|
|
|
$mpdconf .= <<<EOD
|
|
new -i {$realif} pppoeclient pppoeclient
|
|
|
|
EOD;
|
|
if ($interface == "wan")
|
|
$mpdconf .= <<<EOD
|
|
set iface route default
|
|
|
|
EOD;
|
|
|
|
$mpdconf .= <<<EOD
|
|
set iface {$ondemand} on-demand
|
|
set iface idle {$idle}
|
|
set iface enable tcpmssfix
|
|
set iface up-script /usr/local/sbin/ppp-linkup
|
|
set iface down-script /usr/local/sbin/ppp-linkdown
|
|
|
|
EOD;
|
|
|
|
if (isset($wancfg['ondemand'])) {
|
|
if (isset($wancfg['local-ip']) && isset($wancfg['remote-ip'])) {
|
|
$mpdconf .= <<<EOD
|
|
set iface addrs {$wancfg['local-ip']} {$wancfg['remote-ip']}
|
|
|
|
EOD;
|
|
} else {
|
|
$mpdconf .= <<<EOD
|
|
set iface addrs 192.0.2.112 192.0.2.113
|
|
|
|
EOD;
|
|
}
|
|
}
|
|
|
|
$mpdconf .= <<<EOD
|
|
set bundle disable multilink
|
|
set auth authname "{$wancfg['username']}"
|
|
set auth password "{$wancfg['password']}"
|
|
set link keep-alive 10 60
|
|
set link max-redial 0
|
|
set link no acfcomp protocomp
|
|
set link disable pap chap
|
|
set link accept chap
|
|
set link mtu 1492
|
|
set ipcp yes vjcomp
|
|
set ipcp ranges 0.0.0.0/0 0.0.0.0/0
|
|
|
|
EOD;
|
|
|
|
if (isset($config['system']['dnsallowoverride'])) {
|
|
$mpdconf .= <<<EOD
|
|
set ipcp enable req-pri-dns
|
|
|
|
EOD;
|
|
}
|
|
|
|
if (!isset($wancfg['dnsnosec'])) {
|
|
$mpdconf .= <<<EOD
|
|
set ipcp enable req-sec-dns
|
|
|
|
EOD;
|
|
}
|
|
|
|
$mpdconf .= <<<EOD
|
|
open
|
|
|
|
EOD;
|
|
|
|
fwrite($fd, $mpdconf);
|
|
fclose($fd);
|
|
|
|
/* generate mpd.links */
|
|
$fd = fopen("{$g['varetc_path']}/mpd_{$interface}.links", "w");
|
|
if (!$fd) {
|
|
printf("Error: cannot open mpd_{$interface}.links in interfaces_wan_pppoe_configure().\n");
|
|
return 1;
|
|
}
|
|
|
|
$mpdconf = <<<EOD
|
|
pppoeclient:
|
|
set link type pppoe
|
|
set pppoe iface {$wancfg['if']}
|
|
set pppoe service "{$wancfg['provider']}"
|
|
set pppoe enable originate
|
|
set pppoe disable incoming
|
|
|
|
EOD;
|
|
|
|
fwrite($fd, $mpdconf);
|
|
fclose($fd);
|
|
|
|
if(file_exists("{$g['varrun_path']}/pppoe_{$interface}.pid") and $g['booting']) {
|
|
/* if we are booting and mpd has already been started then don't start again. */
|
|
} else {
|
|
/* if mpd is active, lets take it down */
|
|
if(file_exists("{$g['varrun_path']}/pppoe_{$interface}.pid")) {
|
|
killbypid("{$g['varrun_path']}/pppoe_{$interface}.pid");
|
|
sleep(3);
|
|
}
|
|
/* fire up mpd */
|
|
mwexec("/usr/local/sbin/mpd4 -b -d {$g['varetc_path']} -f mpd_{$interface}.conf -l mpd_{$interface}.links -p {$g['varrun_path']}/pppoe_{$interface}.pid pppoeclient");
|
|
}
|
|
|
|
/* sleep until wan is up - or 30 seconds, whichever comes first */
|
|
for ($count = 0; $count < 30; $count++) {
|
|
if(file_exists("{$g['tmp_path']}/wanup")) {
|
|
break;
|
|
}
|
|
sleep(1);
|
|
}
|
|
|
|
unlink_if_exists("{$g['tmp_path']}/wanup");
|
|
|
|
return 0;
|
|
}
|
|
|
|
function interfaces_wan_pppoe_restart($interface = "wan") {
|
|
interfaces_wan_pppoe_down($interface);
|
|
sleep(1);
|
|
interfaces_wan_pppoe_up($interface);
|
|
}
|
|
|
|
function interfaces_wan_pppoe_down($interface = "wan") {
|
|
global $g;
|
|
sigkillbypid("{$g['varrun_path']}/pppoe_{$interface}.pid", "SIGUSR2");
|
|
sleep(1);
|
|
}
|
|
|
|
function interfaces_wan_pppoe_up($interface = "wan") {
|
|
global $g;
|
|
sigkillbypid("{$g['varrun_path']}/pppoe_{$interface}.pid", "SIGUSR1");
|
|
sleep(1);
|
|
}
|
|
|
|
function interfaces_wan_pptp_configure($interface) {
|
|
global $config, $g;
|
|
|
|
$wancfg = $config['interfaces'][$interface];
|
|
|
|
/* generate mpd.conf */
|
|
$fd = fopen("{$g['varetc_path']}/mpd_{$interface}.conf", "w");
|
|
if (!$fd) {
|
|
printf("Error: cannot open mpd_{$interface}.conf in interfaces_wan_pptp_configure().\n");
|
|
return 1;
|
|
}
|
|
|
|
$idle = 0;
|
|
|
|
if (isset($wancfg['ondemand'])) {
|
|
$ondemand = "enable";
|
|
if ($wancfg['timeout'])
|
|
$idle = $wancfg['timeout'];
|
|
} else {
|
|
$ondemand = "disable";
|
|
}
|
|
|
|
$mpdconf = <<<EOD
|
|
startup:
|
|
pptp:
|
|
|
|
EOD;
|
|
|
|
if ($interface == "wan")
|
|
$realif = "pptp0";
|
|
else {
|
|
// Here code assumes only that strings of form "opt#" will be passed.
|
|
$realif = "pptp" . substr($interface, 3);
|
|
}
|
|
|
|
$mpdconf .= <<<EOD
|
|
new -i {$realif} pptp pptp
|
|
|
|
EOD;
|
|
if ($interface == "wan")
|
|
$mpdconf .= <<<EOD
|
|
set iface route default
|
|
|
|
EOD;
|
|
|
|
$mpdconf .= <<<EOD
|
|
set iface {$ondemand} on-demand
|
|
set iface idle {$idle}
|
|
set iface up-script /usr/local/sbin/ppp-linkup
|
|
set iface down-script /usr/local/sbin/ppp-linkdown
|
|
|
|
EOD;
|
|
|
|
if (isset($wanfg['ondemand'])) {
|
|
$mpdconf .= <<<EOD
|
|
set iface addrs 10.0.0.1 10.0.0.2
|
|
|
|
EOD;
|
|
}
|
|
|
|
$mpdconf .= <<<EOD
|
|
set bundle disable multilink
|
|
set bundle authname "{$wancfg['username']}"
|
|
set bundle password "{$wancfg['password']}"
|
|
set bundle no noretry
|
|
set link keep-alive 10 60
|
|
set link max-redial 0
|
|
set link no acfcomp protocomp
|
|
set link disable pap chap
|
|
set link accept chap
|
|
set ipcp no vjcomp
|
|
set ipcp ranges 0.0.0.0/0 0.0.0.0/0
|
|
|
|
EOD;
|
|
if (isset($config['system']['dnsallowoverride'])) {
|
|
$mpdconf .= <<<EOD
|
|
set ipcp enable req-pri-dns
|
|
|
|
EOD;
|
|
}
|
|
|
|
$mpdconf .= <<<EOD
|
|
open
|
|
|
|
EOD;
|
|
|
|
fwrite($fd, $mpdconf);
|
|
fclose($fd);
|
|
|
|
/* generate mpd.links */
|
|
$fd = fopen("{$g['varetc_path']}/mpd_{$interface}.links", "w");
|
|
if (!$fd) {
|
|
printf("Error: cannot open mpd_{$interface}.links in interfaces_wan_pptp_configure().\n");
|
|
return 1;
|
|
}
|
|
|
|
$mpdconf = <<<EOD
|
|
pptp:
|
|
set link type pptp
|
|
set pptp enable originate outcall
|
|
set pptp disable windowing
|
|
set pptp self {$wancfg['local']}
|
|
set pptp peer {$wancfg['remote']}
|
|
|
|
EOD;
|
|
|
|
fwrite($fd, $mpdconf);
|
|
fclose($fd);
|
|
|
|
/* configure interface */
|
|
mwexec("/sbin/ifconfig " . escapeshellarg($wancfg['if']) . " " .
|
|
escapeshellarg($wancfg['local'] . "/" . $wancfg['subnet']) . " up");
|
|
|
|
/* fire up mpd */
|
|
mwexec("/usr/local/sbin/mpd4 -b -d {$g['varetc_path']} -f mpd_{$interface}.conf -l mpd_{$interface}.links -p {$g['varrun_path']}/pptp_{$interface}.pid pptp");
|
|
|
|
return 0;
|
|
}
|
|
|
|
function interfaces_wan_pptp_restart($interface = "wan") {
|
|
interfaces_wan_pptp_down($interface);
|
|
sleep(1);
|
|
interfaces_wan_pptp_up($interface);
|
|
}
|
|
|
|
function interfaces_wan_pptp_down($interface = "wan") {
|
|
global $g;
|
|
sigkillbypid("{$g['varrun_path']}/pptp_{$interface}.pid", "SIGUSR2");
|
|
sleep(1);
|
|
}
|
|
|
|
function interfaces_wan_pptp_up($interface = "wan") {
|
|
global $g;
|
|
sigkillbypid("{$g['varrun_path']}/pptp_{$interface}.pid", "SIGUSR1");
|
|
sleep(1);
|
|
}
|
|
|
|
function interfaces_wan_bigpond_configure($curwanip) {
|
|
global $config, $g;
|
|
|
|
$bpcfg = $config['bigpond'];
|
|
|
|
if (!$curwanip) {
|
|
/* IP address not configured yet, exit */
|
|
return 0;
|
|
}
|
|
|
|
/* kill bpalogin */
|
|
killbyname("bpalogin");
|
|
|
|
/* wait a moment */
|
|
sleep(1);
|
|
|
|
/* get the default domain */
|
|
$nfd = @fopen("{$g['varetc_path']}/defaultdomain.conf", "r");
|
|
if ($nfd) {
|
|
$defaultdomain = trim(fgets($nfd));
|
|
fclose($nfd);
|
|
}
|
|
|
|
/* generate bpalogin.conf */
|
|
$fd = fopen("{$g['varetc_path']}/bpalogin.conf", "w");
|
|
if (!$fd) {
|
|
printf("Error: cannot open bpalogin.conf in interfaces_wan_bigpond_configure().\n");
|
|
return 1;
|
|
}
|
|
|
|
if (!$bpcfg['authserver'])
|
|
$bpcfg['authserver'] = "dce-server";
|
|
if (!$bpcfg['authdomain'])
|
|
$bpcfg['authdomain'] = $defaultdomain;
|
|
|
|
$bpconf = <<<EOD
|
|
username {$bpcfg['username']}
|
|
password {$bpcfg['password']}
|
|
authserver {$bpcfg['authserver']}
|
|
authdomain {$bpcfg['authdomain']}
|
|
localport 5050
|
|
|
|
EOD;
|
|
|
|
if ($bpcfg['minheartbeatinterval'])
|
|
$bpconf .= "minheartbeatinterval {$bpcfg['minheartbeatinterval']}\n";
|
|
|
|
fwrite($fd, $bpconf);
|
|
fclose($fd);
|
|
|
|
/* fire up bpalogin */
|
|
mwexec("/usr/local/sbin/bpalogin -c {$g['varetc_path']}/bpalogin.conf");
|
|
|
|
return 0;
|
|
}
|
|
|
|
function get_real_wan_interface($interface = "wan") {
|
|
global $config;
|
|
|
|
$wanif = $interface;
|
|
|
|
switch ($interface) {
|
|
case "pptp":
|
|
$wanif = "pptp";
|
|
break;
|
|
case "pppoe":
|
|
$wanif = "pppoe";
|
|
break;
|
|
case "openvpn":
|
|
$wanif = "openvpn";
|
|
break;
|
|
case "enc0":
|
|
$wanif = "enc0";
|
|
break;
|
|
/* XXX: dial in support?!
|
|
case "ppp":
|
|
$wanif = "ppp";
|
|
break;
|
|
*/
|
|
default:
|
|
$iflist = get_configured_interface_with_descr();
|
|
|
|
foreach ($iflist as $if => $ifdesc) {
|
|
if ($interface == $if || $interface == $ifdesc) {
|
|
|
|
$cfg = $config['interfaces'][$if];
|
|
|
|
switch ($cfg['ipaddr']) {
|
|
case "carpdev-dhcp":
|
|
$viparr = &$config['virtualip']['vip'];
|
|
$counter = 0;
|
|
if(is_array($viparr))
|
|
foreach ($viparr as $vip) {
|
|
if ($vip['mode'] == "carpdev-dhcp") {
|
|
if($vip['interface'] == $if) {
|
|
$wanif = "carp{$counter}";
|
|
break;
|
|
}
|
|
$counter++;
|
|
} else if ($vip['mode'] = "carp")
|
|
$counter++;
|
|
}
|
|
break;
|
|
case "pppoe":
|
|
if ($if == "wan")
|
|
$wanif = "pppoe0";
|
|
else
|
|
$wanif = "pppoe" . substr($if,3);
|
|
break;
|
|
case "pptp":
|
|
if ($if == "wan")
|
|
$wanif = "pptp0";
|
|
else
|
|
$wanif = "pptp" . substr($if, 3);
|
|
break;
|
|
default:
|
|
if (isset($cfg['ispointtopoint']) && $cfg['pointtopoint'])
|
|
$wanif = "ppp0"; // XXX: PPP needs to convert to mpd
|
|
else
|
|
$wanif = $cfg['if'];
|
|
break;
|
|
}
|
|
|
|
break;
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
|
|
return $wanif;
|
|
}
|
|
|
|
function get_current_wan_address($interface = "wan") {
|
|
global $config, $g;
|
|
|
|
$realif = get_real_wan_interface($interface);
|
|
/* Do we really come here for these interfaces ?! */
|
|
if (in_array($realif, array("pptp", "pppoe", "openvpn", "enc0" /* , "ppp" */)))
|
|
return "";
|
|
|
|
$wancfg = $config['interfaces'][$interface];
|
|
|
|
$ifinfo = "";
|
|
switch ($wancfg['ipaddr']) {
|
|
case "dhcp":
|
|
/* get interface info with netstat */
|
|
exec("/usr/bin/netstat -nWI " . escapeshellarg($realif) . " -f inet", $ifinfo);
|
|
|
|
if (isset($ifinfo[1])) {
|
|
$aif = preg_split("/\s+/", $ifinfo[1]);
|
|
$curwanip = chop($aif[3]);
|
|
|
|
if ($curwanip && is_ipaddr($curwanip) && ($curwanip != "0.0.0.0"))
|
|
return $curwanip;
|
|
}
|
|
|
|
return null;
|
|
break;
|
|
case "pppoe":
|
|
case "pptp":
|
|
case "bigpond":
|
|
/* get interface info with netstat */
|
|
exec("/usr/bin/netstat -nWI " . escapeshellarg($realif) . " -f inet", $ifinfo);
|
|
if (isset($ifinfo[1])) {
|
|
$aif = preg_split("/\s+/", $ifinfo[1]);
|
|
$curwanip = chop($aif[3]);
|
|
|
|
if ($curwanip && is_ipaddr($curwanip) && ($curwanip != "0.0.0.0"))
|
|
return $curwanip;
|
|
}
|
|
|
|
return null;
|
|
break;
|
|
/* carpdev support */
|
|
case "carpdev-dhcp":
|
|
$viparr = &$config['virtualip']['vip'];
|
|
$counter = 0;
|
|
if (is_array($viparr))
|
|
foreach ($viparr as $vip) {
|
|
if ($vip['mode'] == "carpdev-dhcp" &&
|
|
$vip['interface'] == $interface) {
|
|
return str_replace("\n", "", `ifconfig carp{$counter} | grep inet | awk '{ print $2 }'`);
|
|
$counter++;
|
|
} else if ($vip['mode'] == "carp")
|
|
$counter++;
|
|
}
|
|
return null;
|
|
break;
|
|
default:
|
|
if (isset($cfg['ispointtopoint']) && $cfg['pointtopoint']) {
|
|
/* get interface info with netstat */
|
|
exec("/usr/bin/netstat -nWI " . escapeshellarg($realif) . " -f inet", $ifinfo
|
|
);
|
|
if (isset($ifinfo[1])) {
|
|
$aif = preg_split("/\s+/", $ifinfo[1]);
|
|
$curwanip = chop($aif[3]);
|
|
|
|
if ($curwanip && is_ipaddr($curwanip) && ($curwanip != "0.0.0.0"))
|
|
return $curwanip;
|
|
}
|
|
|
|
return null;
|
|
}
|
|
break;
|
|
}
|
|
|
|
/* static WAN IP address */
|
|
return $wancfg['ipaddr'];
|
|
}
|
|
|
|
/****f* interfaces/is_altq_capable
|
|
* NAME
|
|
* is_altq_capable - Test if interface is capable of using ALTQ
|
|
* INPUTS
|
|
* $int - string containing interface name
|
|
* RESULT
|
|
* boolean - true or false
|
|
******/
|
|
|
|
function is_altq_capable($int) {
|
|
/* Per:
|
|
* http://www.freebsd.org/cgi/man.cgi?query=altq&manpath=FreeBSD+6.0-current&format=html
|
|
* Only the following drivers have ALTQ support
|
|
*/
|
|
$capable = array("an", "ath", "awi", "bfe", "bge", "dc", "de", "ed",
|
|
"em", "fxp", "hme", "le", "nve", "re", "rl", "ndis", "sf", "sis", "sk",
|
|
"tun", "vr", "wi", "xl", "vlan", "ste", "aue", "bce", "ep", "gem", "ipw",
|
|
"iwi", "msk", "mxge", "my", "nfe", "npe", "ral", "rum", "stge", "udav", "ural");
|
|
|
|
$int_family = preg_split("/[0-9]+/", $int);
|
|
|
|
if (in_array($int_family[0], $capable))
|
|
return true;
|
|
else
|
|
return false;
|
|
}
|
|
|
|
function get_number_of_ppp_interfaces() {
|
|
$ppps_total = 0;
|
|
$ppps = split("\n", `/sbin/ifconfig -a | /usr/bin/grep ppp | grep flags`);
|
|
foreach($ppps as $bridge) {
|
|
$match_array = "";
|
|
preg_match_all("/ppp(.*):/",$bridge,$match_array);
|
|
if($match_array[1][0] <> "") {
|
|
if($match_array[1][0] > $ppps_total)
|
|
$ppps_total = $match_array[1][0];
|
|
}
|
|
}
|
|
return "{$ppps_total}";
|
|
}
|
|
|
|
function get_wireless_modes($interface)
|
|
{
|
|
/* return wireless modes and channels */
|
|
if(is_interface_wireless($interface)) {
|
|
$wi = 1;
|
|
$ifconfig = "/sbin/ifconfig";
|
|
$awk = "/usr/bin/awk";
|
|
$chan_list = "$ifconfig $interface list chan";
|
|
$stack_list = "$awk -F\"Channel \" '{ gsub(/\\*/, \" \"); print \$2 \"\\\n\" \$3 }'";
|
|
$format_list = "$awk '{print \$5 \" \" \$6 \",\" \$1}'";
|
|
|
|
$interface_channels = "";
|
|
exec("$chan_list | $stack_list | sort -u | $format_list 2>&1", $interface_channels);
|
|
$interface_channel_count = count($interface_channels);
|
|
|
|
$c = 0;
|
|
while ($c < $interface_channel_count)
|
|
{
|
|
$channel_line = explode(",", $interface_channels["$c"]);
|
|
$wireless_mode = trim($channel_line[0]);
|
|
$wireless_channel = trim($channel_line[1]);
|
|
if(trim($wireless_mode) != "") {
|
|
/* if we only have 11g also set 11b channels */
|
|
if($wireless_mode == "11g") {
|
|
$wireless_modes["11b"] = array();
|
|
}
|
|
$wireless_modes["$wireless_mode"]["$c"] = $wireless_channel;
|
|
}
|
|
$c++;
|
|
}
|
|
}
|
|
return($wireless_modes);
|
|
}
|
|
|
|
function get_interface_mac($interface) {
|
|
|
|
/* build interface list with netstat */
|
|
$linkinfo = "";
|
|
exec("/usr/bin/netstat -I $interface -nW -f link", $linkinfo);
|
|
array_shift($linkinfo);
|
|
$alink = preg_split("/\s+/", $linkinfo[0]);
|
|
$mac = chop($alink[3]);
|
|
return $mac;
|
|
}
|
|
|
|
?>
|