-
-
- | Description |
-
-
- Enter a description (name) for the interface here.
- |
-
-
- | Type |
- |
-
-
- | MAC address |
-
-
- Copy my MAC address
-
- This field can be used to modify ("spoof") the MAC
- address of the WAN interface
- (may be required with some cable connections)
- Enter a MAC address in the following format: xx:xx:xx:xx:xx:xx
- or leave blank |
-
-
- | MTU |
-
-
- If you enter a value in this field, then MSS clamping for
- TCP connections to the value entered above minus 40 (TCP/IP
- header size) will be in effect. If you leave this field blank,
- an MTU of 1500 bytes will be assumed. |
-
-
-
-
-
-
- | Static IP configuration |
-
-
- | IP address |
-
- /
- |
+
+ | Type |
+
+ |
-
-
- | Point-to-point IP address |
-
-
- |
-
-
- | Gateway |
-
+ |
+
+
+ | MAC address |
+
+
+
-
- ';" href="#">Copy my MAC address
+
+ This field can be used to modify ("spoof") the MAC
+ address of the WAN interface
+ (may be required with some cable connections)
+ Enter a MAC address in the following format: xx:xx:xx:xx:xx:xx
+ or leave blank
+ |
+
+
+ | MTU |
+
+
+
+ If you enter a value in this field, then MSS clamping for
+ TCP connections to the value entered above minus 40 (TCP/IP
+ header size) will be in effect. If you leave this field blank,
+ an MTU of 1500 bytes will be assumed.
+ |
+
+
+
+
+ |
+
- |
-
-
- |
-
- |
-
-
- |
-
+ |
+
+
-
-
- | PPTP configuration |
-
-
- | Username |
-
- |
-
-
- | Password |
- ">
- |
-
-
- | Local IP address |
- ">
- /
- |
-
-
- | Remote IP address |
-
- |
-
-
- | Dial on demand |
- " >
- Enable Dial-On-Demand mode
- This option causes the interface to operate in dial-on-demand mode, allowing you to have a virtual full time connection. The interface is configured, but the actual connection of the link is delayed until qualifying outgoing traffic is detected. |
-
-
- | Idle timeout |
-
-
-seconds If no qualifying outgoing packets are transmitted for the specified number of seconds, the connection is brought down. An idle timeout of zero disables this feature. |
-
+
+
+
+
+
+
+
+ | PPPoE configuration |
+
+
+ | Username |
+
+ |
+
+
+ | Password |
+
+
+ |
+
+
+ | Service name |
+
+ Hint: this field can usually be left empty
+ |
+
+
+ | Dial on demand |
+
+ " >
+ Enable Dial-On-Demand mode
+ This option causes the interface to operate in dial-on-demand mode, allowing you to have a virtual full time connection. The interface is configured, but the actual connection of the link is delayed until qualifying outgoing traffic is detected.
+ |
+
+
+ | Idle timeout |
+
+ seconds If no qualifying outgoing packets are transmitted for the specified number of seconds, the connection is brought down. An idle timeout of zero disables this feature.
+ |
+
+
+ | =gettext("Periodic reset");?> |
+
+ onclick="Effect.toggle('presetwrap', 'appear', { duration: 1.0 });" />
+ = gettext("enable periodic PPPoE resets"); ?>
+
+
+
+ |
+
+
+ |
+
|
@@ -1039,15 +1061,15 @@ seconds If no qualifying outgoing packets are transmitted for the specified n
-
-
- |
-
-
- | Wireless configuration |
+
+ |
+
+
+ | Wireless configuration |
| Standard |
@@ -1121,11 +1143,11 @@ seconds If no qualifying outgoing packets are transmitted for the specified n
(this might create problems for some clients).
-
+
| Transmit power |
Note: Typically only a few discreet power settings are available and the driver will use the setting closest to the specified value. Not all adaptors support changing the transmit power setting.
|
-
+
| Channel |
-
-
- Note: Not all channels may be supported by your card
+ ?>
+
+
+ Note: Not all channels may be supported by your card
+ |
| Distance setting |
@@ -1172,106 +1196,93 @@ seconds If no qualifying outgoing packets are transmitted for the specified n
Enable WEP
-
- 40 (64) bit keys may be entered as 5 ASCII characters or 10 hex digits preceded by '0x'.
- 104 (128) bit keys may be entered as 13 ASCII characters or 26 hex digits preceded by '0x'.
-
-
-
- | WPA |
- >
+ |
+
+ 40 (64) bit keys may be entered as 5 ASCII characters or 10 hex digits preceded by '0x'.
+ 104 (128) bit keys may be entered as 13 ASCII characters or 26 hex digits preceded by '0x'.
+ |
+
+
+ | WPA |
+ >
Enable WPA
Passphrase must be from 8 to 63 chars.
- |
-
+
+
| WPA Mode |
- |
| WPA Key Management Mode |
-
- value="WPA-PSK">Pre Shared Key
- value="WPA-EAP">Extensible Authentication Protocol
- value="WPA-PSK WPA-EAP">Both
-
+ |
+
+ value="WPA-PSK">Pre Shared Key
+ value="WPA-EAP">Extensible Authentication Protocol
+ value="WPA-PSK WPA-EAP">Both
+
|
- /*
-
- | Enable MAC Filtering |
- >
- Setting this option will enable the use of a mac filterlist to allow/deny association based on mac address
-
-
- value="0">Allow
- value="1">Deny
- value="2">Radius
-
-
- Setting this to "Allow" will allow all clients in not in deny list, while "Deny" will deny all clients not in allow list.
- Radius will cause allow and deny list to be searched and then query radius.
- |
-
- */ ?>
| Authentication |
-
- value="1">Open System Authentication
- value="2">Shared Key Authentication
- value="3">Both
-
- Note: Shared Key Authentication requires WEP.
+ |
+
+ value="1">Open System Authentication
+ value="2">Shared Key Authentication
+ value="3">Both
+
+ Note: Shared Key Authentication requires WEP.
|
| WPA Pairwise |
-
- value="CCMP TKIP">Both
- value="CCMP">AES
- value="TKIP">TKIP
-
+ |
+
+ value="CCMP TKIP">Both
+ value="CCMP">AES
+ value="TKIP">TKIP
+
|
@@ -1299,48 +1310,47 @@ seconds If no qualifying outgoing packets are transmitted for the specified n
endif; ?>
-
- |
-
-
- | Other |
-
-
- | FTP Helper |
-
- />
- Disable the userland FTP-Proxy application
-
- |
-
-
- |
-
-
- | |
- >
- Block private networks
- When set, this option blocks traffic from IP addresses that
- are reserved for private
- networks as per RFC 1918 (10/8, 172.16/12, 192.168/16) as
- well as loopback addresses
- (127/8). You should generally leave this option turned on,
- unless your WAN network
- lies in such a private address space, too. |
-
-
- | |
- >
- Block bogon networks
- When set, this option blocks traffic from IP addresses that
- are reserved (but not RFC 1918) or not yet assigned by IANA.
- Bogons are prefixes that should never appear in the Internet routing table, and obviously should not appear as the source address in any packets you receive. |
+
+ |
+
+
+ | Other |
+
+
+ | FTP Helper |
+
+ />
+ Disable the userland FTP-Proxy application
+
+ |
+
+
+ |
+
+
+ | |
+ >
+ Block private networks
+ When set, this option blocks traffic from IP addresses that
+ are reserved for private
+ networks as per RFC 1918 (10/8, 172.16/12, 192.168/16) as
+ well as loopback addresses
+ (127/8). You should generally leave this option turned on,
+ unless your WAN network
+ lies in such a private address space, too. |
-
+
+ | |
+ >
+ Block bogon networks
+ When set, this option blocks traffic from IP addresses that
+ are reserved (but not RFC 1918) or not yet assigned by IANA.
+ Bogons are prefixes that should never appear in the Internet routing table, and obviously should not appear as the source address in any packets you receive. |
+
+
|
-
+
|
@@ -1349,7 +1359,7 @@ roxy" value="yes" />
|
- |
+
| |