=$mandfldhtml;?>
- =gettext("Enter the IP address of a host which will accept incoming ".
- "PPTP connections.");?>
+ =gettext("Enter the IP address of a host which will accept incoming " .
+ "PPTP connections"); ?>.
- >
- =gettext("Enable PPTP server");?>
+ >
+ =gettext("Enable PPTP server"); ?>
-
=gettext("No. PPTP users");?>
+
=gettext("No. PPTP users"); ?>
- =gettext("Hint: 10 is TEN pptp clients");?>
+ =gettext("Hint: 10 is TEN pptp clients"); ?>
-
=gettext("Server address");?>
+
=gettext("Server address"); ?>
=$mandfldhtml;?>
- =gettext("Enter the IP address the PPTP server should use on its side ".
- "for all clients.");?>
+ =gettext("Enter the IP address the PPTP server should use on its side " .
+ "for all clients"); ?>.
-
=gettext("Remote address ".
- "range");?>
+
=gettext("Remote address " .
+ "range"); ?>
=$mandfldhtml;?>
- =gettext("Specify the starting address for the client IP subnet.");?>
+ =gettext("Specify the starting address for the client IP subnet"); ?>.
-
=gettext("PPTP DNS Servers");?>
+
=gettext("PPTP DNS Servers"); ?>
=$mandfldhtml;?>
- =gettext("primary and secondary DNS servers assigned to PPTP clients");?>
+ =gettext("primary and secondary DNS servers assigned to PPTP clients"); ?>
-
=gettext("WINS Server");?>
+
=gettext("WINS Server"); ?>
+
-
=gettext("RADIUS");?>
+
=gettext("RADIUS"); ?>
>
- =gettext("Use a RADIUS server for authentication");?>
- =gettext("When set, all users will be authenticated using ".
- "the RADIUS server specified below. The local user database ".
- "will not be used.");?>
+ =gettext("Use a RADIUS server for authentication"); ?>
+ =gettext("When set, all users will be authenticated using " .
+ "the RADIUS server specified below. The local user database " .
+ "will not be used"); ?>.
- >
- =gettext("Enable RADIUS accounting ");?>
- =gettext("Sends accounting packets to the RADIUS server.");?>
+ >
+ =gettext("Enable RADIUS accounting"); ?>
+ =gettext("Sends accounting packets to the RADIUS server"); ?>.
- >
- =gettext("Secondary RADIUS server for failover authentication");?>
- =gettext("When set, all requests will go to the secondary server when primary fails");?>
+ >
+ =gettext("Secondary RADIUS server for failover authentication"); ?>
+ =gettext("When set, all requests will go to the secondary server when primary fails"); ?>
>
- =gettext("RADIUS issued IPs");?>
- =gettext("Issue IP addresses via RADIUS server.");?>
+ =gettext("RADIUS issued IPs"); ?>
+ =gettext("Issue IP addresses via RADIUS server"); ?>.
-
=gettext("RADIUS NAS IP");?>
+
=gettext("RADIUS NAS IP"); ?>
-
=gettext("RADIUS Accounting Update");?>
+
=gettext("RADIUS Accounting Update"); ?>
-
=gettext("RADIUS Server ");?>
+
=gettext("RADIUS Server"); ?>
- =gettext("Enter the IP address, RADIUS port, and RADIUS accounting port of the RADIUS server.");?>
+ =gettext("Enter the IP address, RADIUS port, and RADIUS accounting port of the RADIUS server"); ?>.
-
=gettext("RADIUS shared secret");?>
+
=gettext("RADIUS shared secret"); ?>
- =gettext("Enter the shared secret that will be used to authenticate ".
- "to the RADIUS server.");?>
+ =gettext("Enter the shared secret that will be used to authenticate " .
+ "to the RADIUS server"); ?>.
-
=gettext("Secondary RADIUS server ");?>
+
=gettext("Secondary RADIUS server"); ?>
- =gettext("Enter the IP address, RADIUS port, and RADIUS accounting port of the RADIUS server.");?>
+ =gettext("Enter the IP address, RADIUS port, and RADIUS accounting port of the RADIUS server"); ?>.
-
=gettext("Secondary RADIUS shared secret");?>
+
=gettext("Secondary RADIUS shared secret"); ?>
- =gettext("Enter the shared secret that will be used to authenticate ".
- "to the secondary RADIUS server.");?>
+ =gettext("Enter the shared secret that will be used to authenticate " .
+ "to the secondary RADIUS server"); ?>.
@@ -446,25 +447,25 @@ function enable_change(enable_over) {
- >
- =gettext("Require 128-bit encryption");?>
- =gettext("When set, only 128-bit encryption will be accepted. Otherwise ".
- "40-bit and 56-bit encryption will be accepted as well. Note that ".
- "encryption will always be forced on PPTP connections (i.e. ".
- "unencrypted connections will not be accepted).");?>
+ >
+ =gettext("Require 128-bit encryption"); ?>
+ =gettext("When set, only 128-bit encryption will be accepted. Otherwise " .
+ "40-bit and 56-bit encryption will be accepted as well. Note that " .
+ "encryption will always be forced on PPTP connections (i.e. " .
+ "unencrypted connections will not be accepted)"); ?>.