Add ttys wrap file

etc/ttys_wrap

@@ -0,0 +1,35 @@
+#
+# $FreeBSD: src/etc/etc.i386/ttys,v 1.10 2003/10/24 15:44:08 simokawa Exp $
+#       @(#)ttys        5.1 (Berkeley) 4/17/89
+#
+# This file specifies various information about terminals on the system.
+# It is used by several different programs.  Common entries for the
+# various columns include:
+#
+# name  The name of the terminal device.
+#
+# getty The program to start running on the terminal.  Typically a
+#       getty program, as the name implies.  Other common entries
+#       include none, when no getty is needed, and xdm, to start the
+#       X Window System.
+#
+# type The initial terminal type for this port.  For hardwired
+#      terminal lines, this will contain the type of terminal used.
+#      For virtual consoles, the correct type is typically cons25, but
+#      vt220 will work better if you need interoperability with other
+#      systems like Solaris or GNU/Linux.
+#      Other common values include network for network connections on
+#      pseudo-terminals, dialup for incoming modem ports, and unknown
+#      when the terminal type cannot be predetermined.
+#
+# status Must be on or off.  If on, init will run the getty program on
+#        the specified port.  If the word "secure" appears, this tty
+#        allows root login.
+#
+# name  getty                           type    status          comments
+#
+# If console is marked "insecure", then init will ask for the root password
+# when going to single-user mode.
+#console  "/usr/libexec/getty Pc"         cons25  on  secure
+#
+ttyv0   "/usr/libexec/getty Pc"         cons25  off  secure